suricata.yaml - Suricata - Open Information Security Foundation

Support #3377 » suricata.yaml

suricata.yaml - Taylor Walton, 12/03/2019 04:46 PM

    
    %YAML 1.1

    ---

    # Suricata configuration file. In addition to the comments describing all

    # options in this file, full documentation can be found at:

    # https://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html

    ##

    ## Step 1: inform Suricata about your network

    ##

    vars:

      # more specific is better for alert accuracy and performance

      address-groups:

        HOME_NET: "[192.168.0.0/16,10.0.0.0/8,172.16.0.0/12]"

        #HOME_NET: "[192.168.0.0/16]"

        #HOME_NET: "[10.0.0.0/8]"

        #HOME_NET: "[172.16.0.0/12]"

        #HOME_NET: "any"

        EXTERNAL_NET: "!$HOME_NET"

        #EXTERNAL_NET: "any"

        HTTP_SERVERS: "$HOME_NET"

        SMTP_SERVERS: "$HOME_NET"

        SQL_SERVERS: "$HOME_NET"

        DNS_SERVERS: "$HOME_NET"

        TELNET_SERVERS: "$HOME_NET"

        AIM_SERVERS: "$EXTERNAL_NET"

        DC_SERVERS: "$HOME_NET"

        DNP3_SERVER: "$HOME_NET"

        DNP3_CLIENT: "$HOME_NET"

        MODBUS_CLIENT: "$HOME_NET"

        MODBUS_SERVER: "$HOME_NET"

        ENIP_CLIENT: "$HOME_NET"

        ENIP_SERVER: "$HOME_NET"

      port-groups:

        HTTP_PORTS: "80"

        SHELLCODE_PORTS: "!80"

        ORACLE_PORTS: 1521

        SSH_PORTS: 22

        DNP3_PORTS: 20000

        MODBUS_PORTS: 502

        FILE_DATA_PORTS: "[$HTTP_PORTS,110,143]"

        FTP_PORTS: 21

        VXLAN_PORTS: 4789

    ##

    ## Step 2: select outputs to enable

    ##

    # The default logging directory.  Any log or output file will be

    # placed here if its not specified with a full path name. This can be

    # overridden with the -l command line parameter.

    default-log-dir: /var/log/suricata/

    # global stats configuration

    stats:

      enabled: yes

      # The interval field (in seconds) controls at what interval

      # the loggers are invoked.

      interval: 8

      # Add decode events as stats.

      #decoder-events: true

      # Decoder event prefix in stats. Has been 'decoder' before, but that leads

      # to missing events in the eve.stats records. See issue #2225.

      decoder-events-prefix: "decoder.event"

      # Add stream events as stats.

      #stream-events: false

    # Configure the type of alert (and other) logging you would like.

    outputs:

      # a line based alerts log similar to Snort's fast.log

      - fast:

          enabled: yes

          filename: fast.log

          append: yes

          #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

      # Extensible Event Format (nicknamed EVE) event log in JSON format

      - eve-log:

          enabled: yes

          filetype: regular #regular|syslog|unix_dgram|unix_stream|redis

          filename: eve.json

          #prefix: "@cee: " # prefix to prepend to each log entry

          # the following are valid when type: syslog above

          #identity: "suricata"

          #facility: local5

          #level: Info ## possible levels: Emergency, Alert, Critical,

                       ## Error, Warning, Notice, Info, Debug

          #redis:

          #  server: 127.0.0.1

          #  port: 6379

          #  async: true ## if redis replies are read asynchronously

          #  mode: list ## possible values: list|lpush (default), rpush, channel|publish

          #             ## lpush and rpush are using a Redis list. "list" is an alias for lpush

          #             ## publish is using a Redis channel. "channel" is an alias for publish

          #  key: suricata ## key or channel to use (default to suricata)

          # Redis pipelining set up. This will enable to only do a query every

          # 'batch-size' events. This should lower the latency induced by network

          # connection at the cost of some memory. There is no flushing implemented

          # so this setting as to be reserved to high traffic suricata.

          #  pipelining:

          #    enabled: yes ## set enable to yes to enable query pipelining

          #    batch-size: 10 ## number of entry to keep in buffer

          # Include top level metadata. Default yes.

          #metadata: no

          # include the name of the input pcap file in pcap file processing mode

          pcap-file: false

          # Community Flow ID

          # Adds a 'community_id' field to EVE records. These are meant to give

          # a records a predictable flow id that can be used to match records to

          # output of other tools such as Bro.

          #

          # Takes a 'seed' that needs to be same across sensors and tools

          # to make the id less predictable.

          # enable/disable the community id feature.

          community-id: false

          # Seed value for the ID output. Valid values are 0-65535.

          community-id-seed: 0

          # HTTP X-Forwarded-For support by adding an extra field or overwriting

          # the source or destination IP address (depending on flow direction)

          # with the one reported in the X-Forwarded-For HTTP header. This is

          # helpful when reviewing alerts for traffic that is being reverse

          # or forward proxied.

          xff:

            enabled: no

            # Two operation modes are available, "extra-data" and "overwrite".

            mode: extra-data

            # Two proxy deployments are supported, "reverse" and "forward". In

            # a "reverse" deployment the IP address used is the last one, in a

            # "forward" deployment the first IP address is used.

            deployment: reverse

            # Header name where the actual IP address will be reported, if more

            # than one IP address is present, the last IP address will be the

            # one taken into consideration.

            header: X-Forwarded-For

          types:

            - alert:

                # payload: yes             # enable dumping payload in Base64

                # payload-buffer-size: 4kb # max size of payload buffer to output in eve-log

                # payload-printable: yes   # enable dumping payload in printable (lossy) format

                # packet: yes              # enable dumping of packet (without stream segments)

                # http-body: yes           # enable dumping of http body in Base64

                # http-body-printable: yes # enable dumping of http body in printable format

                # metadata: no             # enable inclusion of app layer metadata with alert. Default yes

                # Enable the logging of tagged packets for rules using the

                # "tag" keyword.

                tagged-packets: yes

            - http:

                extended: yes     # enable this for extended logging information

                # custom allows additional http fields to be included in eve-log

                # the example below adds three additional fields when uncommented

                #custom: [Accept-Encoding, Accept-Language, Authorization]

            - dns:

                # This configuration uses the new DNS logging format,

                # the old configuration is still available:

                # http://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html#eve-extensible-event-format

                # Use version 2 logging with the new format:

                # DNS answers will be logged in one single event

                # rather than an event for each of it.

                # Without setting a version the version

                # will fallback to 1 for backwards compatibility.

                version: 2

                # Enable/disable this logger. Default: enabled.

                enabled: yes

                # Control logging of requests and responses:

                # - requests: enable logging of DNS queries

                # - responses: enable logging of DNS answers

                # By default both requests and responses are logged.

                #requests: no

                #responses: no

                # Format of answer logging:

                # - detailed: array item per answer

                # - grouped: answers aggregated by type

                # Default: all

                #formats: [detailed, grouped]

                # Answer types to log.

                # Default: all

                #types: [a, aaaa, cname, mx, ns, ptr, txt]

            - tls:

                extended: yes     # enable this for extended logging information

                # output TLS transaction where the session is resumed using a

                # session id

                #session-resumption: no

                # custom allows to control which tls fields that are included

                # in eve-log

                #custom: [subject, issuer, session_resumed, serial, fingerprint, sni, version, not_before, not_after, certificate, chain, ja3]

            - files:

                force-magic: no   # force logging magic on all logged files

                # force logging of checksums, available hash functions are md5,

                # sha1 and sha256

                #force-hash: [md5]

            #- drop:

                alerts: yes      # log alerts that caused drops

                flows: all       # start or all: 'start' logs only a single drop

            #                     # per flow direction. All logs each dropped pkt.

            - smtp:

                #extended: yes # enable this for extended logging information

                # this includes: bcc, message-id, subject, x_mailer, user-agent

                # custom fields logging from the list:

                #  reply-to, bcc, message-id, subject, x-mailer, user-agent, received,

                #  x-originating-ip, in-reply-to, references, importance, priority,

                #  sensitivity, organization, content-md5, date

                #custom: [received, x-mailer, x-originating-ip, relays, reply-to, bcc]

                # output md5 of fields: body, subject

                # for the body you need to set app-layer.protocols.smtp.mime.body-md5

                # to yes

                #md5: [body, subject]

            #- dnp3

            - nfs

            - smb

            - tftp

            - ikev2

            - krb5

            - dhcp:

                # DHCP logging requires Rust.

                enabled: yes

                # When extended mode is on, all DHCP messages are logged

                # with full detail. When extended mode is off (the

                # default), just enough information to map a MAC address

                # to an IP address is logged.

                extended: no

            - ssh

            - stats:

                totals: yes       # stats for all threads merged together

                threads: no       # per thread stats

                deltas: no        # include delta values

            # bi-directional flows

            - flow

            # uni-directional flows

            #- netflow

            # Metadata event type. Triggered whenever a pktvar is saved

            # and will include the pktvars, flowvars, flowbits and

            # flowints.

            #- metadata

      # alert output for use with Barnyard2

      - unified2-alert:

          enabled: no

          filename: unified2.alert

          # File size limit.  Can be specified in kb, mb, gb.  Just a number

          # is parsed as bytes.

          #limit: 32mb

          # By default unified2 log files have the file creation time (in

          # unix epoch format) appended to the filename. Set this to yes to

          # disable this behaviour.

          #nostamp: no

          # Sensor ID field of unified2 alerts.

          #sensor-id: 0

          # Include payload of packets related to alerts. Defaults to true, set to

          # false if payload is not required.

          #payload: yes

          # HTTP X-Forwarded-For support by adding the unified2 extra header or

          # overwriting the source or destination IP address (depending on flow

          # direction) with the one reported in the X-Forwarded-For HTTP header.

          # This is helpful when reviewing alerts for traffic that is being reverse

          # or forward proxied.

          xff:

            enabled: no

            # Two operation modes are available, "extra-data" and "overwrite". Note

            # that in the "overwrite" mode, if the reported IP address in the HTTP

            # X-Forwarded-For header is of a different version of the packet

            # received, it will fall-back to "extra-data" mode.

            mode: extra-data

            # Two proxy deployments are supported, "reverse" and "forward". In

            # a "reverse" deployment the IP address used is the last one, in a

            # "forward" deployment the first IP address is used.

            deployment: reverse

            # Header name where the actual IP address will be reported, if more

            # than one IP address is present, the last IP address will be the

            # one taken into consideration.

            header: X-Forwarded-For

      # a line based log of HTTP requests (no alerts)

      - http-log:

          enabled: yes

          filename: http.log

          append: yes

          #extended: yes     # enable this for extended logging information

          #custom: yes       # enabled the custom logging format (defined by customformat)

          #customformat: "%{%D-%H:%M:%S}t.%z %{X-Forwarded-For}i %H %m %h %u %s %B %a:%p -> %A:%P"

          #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

      # a line based log of TLS handshake parameters (no alerts)

      - tls-log:

          enabled: no  # Log TLS connections.

          filename: tls.log # File to store TLS logs.

          append: yes

          #extended: yes     # Log extended information like fingerprint

          #custom: yes       # enabled the custom logging format (defined by customformat)

          #customformat: "%{%D-%H:%M:%S}t.%z %a:%p -> %A:%P %v %n %d %D"

          #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

          # output TLS transaction where the session is resumed using a

          # session id

          #session-resumption: no

      # output module to store certificates chain to disk

      - tls-store:

          enabled: no

          #certs-log-dir: certs # directory to store the certificates files

      # a line based log of DNS requests and/or replies (no alerts)

      # Note: not available when Rust is enabled (--enable-rust).

      - dns-log:

          enabled: yes

          filename: dns.log

          append: yes

          #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

      # Packet log... log packets in pcap format. 3 modes of operation: "normal"

      # "multi" and "sguil".

      #

      # In normal mode a pcap file "filename" is created in the default-log-dir,

      # or are as specified by "dir".

      # In multi mode, a file is created per thread. This will perform much

      # better, but will create multiple files where 'normal' would create one.

      # In multi mode the filename takes a few special variables:

      # - %n -- thread number

      # - %i -- thread id

      # - %t -- timestamp (secs or secs.usecs based on 'ts-format'

      # E.g. filename: pcap.%n.%t

      #

      # Note that it's possible to use directories, but the directories are not

      # created by Suricata. E.g. filename: pcaps/%n/log.%s will log into the

      # per thread directory.

      #

      # Also note that the limit and max-files settings are enforced per thread.

      # So the size limit when using 8 threads with 1000mb files and 2000 files

      # is: 8*1000*2000 ~ 16TiB.

      #

      # In Sguil mode "dir" indicates the base directory. In this base dir the

      # pcaps are created in th directory structure Sguil expects:

      #

      # $sguil-base-dir/YYYY-MM-DD/$filename.<timestamp>

      #

      # By default all packets are logged except:

      # - TCP streams beyond stream.reassembly.depth

      # - encrypted streams after the key exchange

      #

      - pcap-log:

          enabled: no

          filename: log.pcap

          # File size limit.  Can be specified in kb, mb, gb.  Just a number

          # is parsed as bytes.

          limit: 1000mb

          # If set to a value will enable ring buffer mode. Will keep Maximum of "max-files" of size "limit"

          max-files: 2000

          # Compression algorithm for pcap files. Possible values: none, lz4.

          # Enabling compression is incompatible with the sguil mode. Note also

          # that on Windows, enabling compression will *increase* disk I/O.

          compression: none

          # Further options for lz4 compression. The compression level can be set

          # to a value between 0 and 16, where higher values result in higher

          # compression.

          #lz4-checksum: no

          #lz4-level: 0

          mode: normal # normal, multi or sguil.

          # Directory to place pcap files. If not provided the default log

          # directory will be used. Required for "sguil" mode.

          #dir: /nsm_data/

          #ts-format: usec # sec or usec second format (default) is filename.sec usec is filename.sec.usec

          use-stream-depth: no #If set to "yes" packets seen after reaching stream inspection depth are ignored. "no" logs all packets

          honor-pass-rules: no # If set to "yes", flows in which a pass rule matched will stopped being logged.

      # a full alerts log containing much information for signature writers

      # or for investigating suspected false positives.

      - alert-debug:

          enabled: no

          filename: alert-debug.log

          append: yes

          #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

      # alert output to prelude (https://www.prelude-siem.org/) only

      # available if Suricata has been compiled with --enable-prelude

      - alert-prelude:

          enabled: no

          profile: suricata

          log-packet-content: no

          log-packet-header: yes

      # Stats.log contains data from various counters of the Suricata engine.

      - stats:

          enabled: yes

          filename: stats.log

          append: yes       # append to file (yes) or overwrite it (no)

          totals: yes       # stats for all threads merged together

          threads: no       # per thread stats

          #null-values: yes  # print counters that have value 0

      # a line based alerts log similar to fast.log into syslog

      - syslog:

          enabled: no

          # reported identity to syslog. If ommited the program name (usually

          # suricata) will be used.

          #identity: "suricata"

          facility: local5

          #level: Info ## possible levels: Emergency, Alert, Critical,

                       ## Error, Warning, Notice, Info, Debug

      # a line based information for dropped packets in IPS mode

      - drop:

          enabled: yes

          filename: drop.log

          append: yes

          #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

      # Output module for storing files on disk. Files are stored in a

      # directory names consisting of the first 2 characters of the

      # SHA256 of the file. Each file is given its SHA256 as a filename.

      #

      # When a duplicate file is found, the existing file is touched to

      # have its timestamps updated.

      #

      # Unlike the older filestore, metadata is not written out by default

      # as each file should already have a "fileinfo" record in the

      # eve.log. If write-fileinfo is set to yes, the each file will have

      # one more associated .json files that consists of the fileinfo

      # record. A fileinfo file will be written for each occurrence of the

      # file seen using a filename suffix to ensure uniqueness.

      #

      # To prune the filestore directory see the "suricatactl filestore

      # prune" command which can delete files over a certain age.

      - file-store:

          version: 2

          enabled: yes

          # Set the directory for the filestore. If the path is not

          # absolute will be be relative to the default-log-dir.

          #dir: filestore

          # Write out a fileinfo record for each occurrence of a

          # file. Disabled by default as each occurrence is already logged

          # as a fileinfo record to the main eve-log.

          #write-fileinfo: yes

          # Force storing of all files. Default: no.

          #force-filestore: yes

          # Override the global stream-depth for sessions in which we want

          # to perform file extraction. Set to 0 for unlimited.

          #stream-depth: 0

          # Uncomment the following variable to define how many files can

          # remain open for filestore by Suricata. Default value is 0 which

          # means files get closed after each write

          #max-open-files: 1000

          # Force logging of checksums, available hash functions are md5,

          # sha1 and sha256. Note that SHA256 is automatically forced by

          # the use of this output module as it uses the SHA256 as the

          # file naming scheme.

          #force-hash: [sha1, md5]

          # NOTE: X-Forwarded configuration is ignored if write-fileinfo is disabled

          # HTTP X-Forwarded-For support by adding an extra field or overwriting

          # the source or destination IP address (depending on flow direction)

          # with the one reported in the X-Forwarded-For HTTP header. This is

          # helpful when reviewing alerts for traffic that is being reverse

          # or forward proxied.

          xff:

            enabled: no

            # Two operation modes are available, "extra-data" and "overwrite".

            mode: extra-data

            # Two proxy deployments are supported, "reverse" and "forward". In

            # a "reverse" deployment the IP address used is the last one, in a

            # "forward" deployment the first IP address is used.

            deployment: reverse

            # Header name where the actual IP address will be reported, if more

            # than one IP address is present, the last IP address will be the

            # one taken into consideration.

            header: X-Forwarded-For

      # output module to store extracted files to disk (old style, deprecated)

      #

      # The files are stored to the log-dir in a format "file.<id>" where <id> is

      # an incrementing number starting at 1. For each file "file.<id>" a meta

      # file "file.<id>.meta" is created. Before they are finalized, they will

      # have a ".tmp" suffix to indicate that they are still being processed.

      #

      # If include-pid is yes, then the files are instead "file.<pid>.<id>", with

      # meta files named as "file.<pid>.<id>.meta"

      #

      # File extraction depends on a lot of things to be fully done:

      # - file-store stream-depth. For optimal results, set this to 0 (unlimited)

      # - http request / response body sizes. Again set to 0 for optimal results.

      # - rules that contain the "filestore" keyword.

      - file-store:

          enabled: no       # set to yes to enable

          log-dir: files    # directory to store the files

          force-magic: no   # force logging magic on all stored files

          # force logging of checksums, available hash functions are md5,

          # sha1 and sha256

          #force-hash: [md5]

          force-filestore: no # force storing of all files

          # override global stream-depth for sessions in which we want to

          # perform file extraction. Set to 0 for unlimited.

          #stream-depth: 0

          #waldo: file.waldo # waldo file to store the file_id across runs

          # uncomment to disable meta file writing

          #write-meta: no

          # uncomment the following variable to define how many files can

          # remain open for filestore by Suricata. Default value is 0 which

          # means files get closed after each write

          #max-open-files: 1000

          include-pid: no # set to yes to include pid in file names

      # output module to log files tracked in a easily parsable JSON format

      - file-log:

          enabled: no

          filename: files-json.log

          append: yes

          #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

          force-magic: no   # force logging magic on all logged files

          # force logging of checksums, available hash functions are md5,

          # sha1 and sha256

          #force-hash: [md5]

      # Log TCP data after stream normalization

      # 2 types: file or dir. File logs into a single logfile. Dir creates

      # 2 files per TCP session and stores the raw TCP data into them.

      # Using 'both' will enable both file and dir modes.

      #

      # Note: limited by stream.depth

      - tcp-data:

          enabled: no

          type: file

          filename: tcp-data.log

      # Log HTTP body data after normalization, dechunking and unzipping.

      # 2 types: file or dir. File logs into a single logfile. Dir creates

      # 2 files per HTTP session and stores the normalized data into them.

      # Using 'both' will enable both file and dir modes.

      #

      # Note: limited by the body limit settings

      - http-body-data:

          enabled: no

          type: file

          filename: http-data.log

      # Lua Output Support - execute lua script to generate alert and event

      # output.

      # Documented at:

      # https://suricata.readthedocs.io/en/latest/output/lua-output.html

      - lua:

          enabled: no

          #scripts-dir: /etc/suricata/lua-output/

          scripts:

          #   - script1.lua

    # Logging configuration.  This is not about logging IDS alerts/events, but

    # output about what Suricata is doing, like startup messages, errors, etc.

    logging:

      # The default log level, can be overridden in an output section.

      # Note that debug level logging will only be emitted if Suricata was

      # compiled with the --enable-debug configure option.

      #

      # This value is overridden by the SC_LOG_LEVEL env var.

      default-log-level: notice

      # The default output format.  Optional parameter, should default to

      # something reasonable if not provided.  Can be overridden in an

      # output section.  You can leave this out to get the default.

      #

      # This value is overridden by the SC_LOG_FORMAT env var.

      #default-log-format: "[%i] %t - (%f:%l) <%d> (%n) -- "

      # A regex to filter output.  Can be overridden in an output section.

      # Defaults to empty (no filter).

      #

      # This value is overridden by the SC_LOG_OP_FILTER env var.

      default-output-filter:

      # Define your logging outputs.  If none are defined, or they are all

      # disabled you will get the default - console output.

      outputs:

      - console:

          enabled: yes

          # type: json

      - file:

          enabled: yes

          level: info

          filename: /var/log/suricata/suricata.log

          # type: json

      - syslog:

          enabled: no

          facility: local5

          format: "[%i] <%d> -- "

          # type: json

    ##

    ## Step 4: configure common capture settings

    ##

    ## See "Advanced Capture Options" below for more options, including NETMAP

    ## and PF_RING.

    ##

    # Linux high speed capture support

    af-packet:

      - interface: em2

        # Number of receive threads. "auto" uses the number of cores

        threads: auto

        # Default clusterid. AF_PACKET will load balance packets based on flow.

        cluster-id: 99

        # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.

        # This is only supported for Linux kernel > 3.1

        # possible value are:

        #  * cluster_round_robin: round robin load balancing

        #  * cluster_flow: all packets of a given flow are send to the same socket

        #  * cluster_cpu: all packets treated in kernel by a CPU are send to the same socket

        #  * cluster_qm: all packets linked by network card to a RSS queue are sent to the same

        #  socket. Requires at least Linux 3.14.

        #  * cluster_random: packets are sent randomly to sockets but with an equipartition.

        #  Requires at least Linux 3.14.

        #  * cluster_rollover: kernel rotates between sockets filling each socket before moving

        #  to the next. Requires at least Linux 3.10.

        #  * cluster_ebpf: eBPF file load balancing. See doc/userguide/capture-hardware/ebpf-xdp.rst for

        #  more info.

        # Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system

        # with capture card using RSS (require cpu affinity tuning and system irq tuning)

        cluster-type: cluster_flow

        # In some fragmentation case, the hash can not be computed. If "defrag" is set

        # to yes, the kernel will do the needed defragmentation before sending the packets.

        defrag: no

        # After Linux kernel 3.10 it is possible to activate the rollover option: if a socket is

        # full then kernel will send the packet on the next socket with room available. This option

        # can minimize packet drop and increase the treated bandwidth on single intensive flow.

        #rollover: yes

        # To use the ring feature of AF_PACKET, set 'use-mmap' to yes

        use-mmap: yes

        # Lock memory map to avoid it goes to swap. Be careful that over subscribing could lock

        # your system

        mmap-locked: yes

        # Use tpacket_v3 capture mode, only active if use-mmap is true

        # Don't use it in IPS or TAP mode as it causes severe latency

        #tpacket-v3: yes

        # Ring size will be computed with respect to max_pending_packets and number

        # of threads. You can set manually the ring size in number of packets by setting

        # the following value. If you are using flow cluster-type and have really network

        # intensive single-flow you could want to set the ring-size independently of the number

        # of threads:

        ring-size: 20000

        # Block size is used by tpacket_v3 only. It should set to a value high enough to contain

        # a decent number of packets. Size is in bytes so please consider your MTU. It should be

        # a power of 2 and it must be multiple of page size (usually 4096).

        #block-size: 32768

        # tpacket_v3 block timeout: an open block is passed to userspace if it is not

        # filled after block-timeout milliseconds.

        #block-timeout: 10

        # On busy system, this could help to set it to yes to recover from a packet drop

        # phase. This will result in some packets (at max a ring flush) being non treated.

        #use-emergency-flush: yes

        # recv buffer size, increase value could improve performance

        # buffer-size: 32768

        # Set to yes to disable promiscuous mode

        # disable-promisc: no

        # Choose checksum verification mode for the interface. At the moment

        # of the capture, some packets may be with an invalid checksum due to

        # offloading to the network card of the checksum computation.

        # Possible values are:

        #  - kernel: use indication sent by kernel for each packet (default)

        #  - yes: checksum validation is forced

        #  - no: checksum validation is disabled

        #  - auto: suricata uses a statistical approach to detect when

        #  checksum off-loading is used.

        # Warning: 'checksum-validation' must be set to yes to have any validation

        #checksum-checks: kernel

        # BPF filter to apply to this interface. The pcap filter syntax apply here.

        #bpf-filter: port 80 or udp

        # You can use the following variables to activate AF_PACKET tap or IPS mode.

        # If copy-mode is set to ips or tap, the traffic coming to the current

        # interface will be copied to the copy-iface interface. If 'tap' is set, the

        # copy is complete. If 'ips' is set, the packet matching a 'drop' action

        # will not be copied.

        copy-mode: ips

        copy-iface: em1

        #  For eBPF and XDP setup including bypass, filter and load balancing, please

        #  see doc/userguide/capture/ebpf-xdt.rst for more info.

      - interface: em1

        # Number of receive threads. "auto" uses the number of cores

        threads: auto

        # Default clusterid. AF_PACKET will load balance packets based on flow.

        cluster-id: 98

        cluster-type: cluster_flow

        defrag: no

        use-mmap: yes

        ring-size: 20000

        copy-mode: ips

        copy-iface: em2

      # Put default values here. These will be used for an interface that is not

      # in the list above.

     # - interface: default

        #threads: auto

        #use-mmap: no

        #rollover: yes

        #tpacket-v3: yes

    # Cross platform libpcap capture support

    pcap:

      - interface: eth0

        # On Linux, pcap will try to use mmaped capture and will use buffer-size

        # as total of memory used by the ring. So set this to something bigger

        # than 1% of your bandwidth.

        #buffer-size: 16777216

        #bpf-filter: "tcp and port 25"

        # Choose checksum verification mode for the interface. At the moment

        # of the capture, some packets may be with an invalid checksum due to

        # offloading to the network card of the checksum computation.

        # Possible values are:

        #  - yes: checksum validation is forced

        #  - no: checksum validation is disabled

        #  - auto: Suricata uses a statistical approach to detect when

        #  checksum off-loading is used. (default)

        # Warning: 'checksum-validation' must be set to yes to have any validation

        #checksum-checks: auto

        # With some accelerator cards using a modified libpcap (like myricom), you

        # may want to have the same number of capture threads as the number of capture

        # rings. In this case, set up the threads variable to N to start N threads

        # listening on the same interface.

        #threads: 16

        # set to no to disable promiscuous mode:

        #promisc: no

        # set snaplen, if not set it defaults to MTU if MTU can be known

        # via ioctl call and to full capture if not.

        #snaplen: 1518

      # Put default values here

      - interface: default

        #checksum-checks: auto

    # Settings for reading pcap files

    pcap-file:

      # Possible values are:

      #  - yes: checksum validation is forced

      #  - no: checksum validation is disabled

      #  - auto: Suricata uses a statistical approach to detect when

      #  checksum off-loading is used. (default)

      # Warning: 'checksum-validation' must be set to yes to have checksum tested

      checksum-checks: auto

    # See "Advanced Capture Options" below for more options, including NETMAP

    # and PF_RING.

    ##

    ## Step 5: App Layer Protocol Configuration

    ##

    # Configure the app-layer parsers. The protocols section details each

    # protocol.

    #

    # The option "enabled" takes 3 values - "yes", "no", "detection-only".

    # "yes" enables both detection and the parser, "no" disables both, and

    # "detection-only" enables protocol detection only (parser disabled).

    app-layer:

      protocols:

        krb5:

          enabled: yes

        ikev2:

          enabled: yes

        tls:

          enabled: yes

          detection-ports:

            dp: 443

          # Generate JA3 fingerprint from client hello

          ja3-fingerprints: no

          # What to do when the encrypted communications start:

          # - default: keep tracking TLS session, check for protocol anomalies,

          #            inspect tls_* keywords. Disables inspection of unmodified

          #            'content' signatures.

          # - bypass:  stop processing this flow as much as possible. No further

          #            TLS parsing and inspection. Offload flow bypass to kernel

          #            or hardware if possible.

          # - full:    keep tracking and inspection as normal. Unmodified content

          #            keyword signatures are inspected as well.

          #

          # For best performance, select 'bypass'.

          #

          #encryption-handling: default

        dcerpc:

          enabled: yes

        ftp:

          enabled: yes

          # memcap: 64mb

        ssh:

          enabled: yes

        smtp:

          enabled: yes

          # Configure SMTP-MIME Decoder

          mime:

            # Decode MIME messages from SMTP transactions

            # (may be resource intensive)

            # This field supercedes all others because it turns the entire

            # process on or off

            decode-mime: yes

            # Decode MIME entity bodies (ie. base64, quoted-printable, etc.)

            decode-base64: yes

            decode-quoted-printable: yes

            # Maximum bytes per header data value stored in the data structure

            # (default is 2000)

            header-value-depth: 2000

            # Extract URLs and save in state data structure

            extract-urls: yes

            # Set to yes to compute the md5 of the mail body. You will then

            # be able to journalize it.

            body-md5: no

          # Configure inspected-tracker for file_data keyword

          inspected-tracker:

            content-limit: 100000

            content-inspect-min-size: 32768

            content-inspect-window: 4096

        imap:

          enabled: detection-only

        msn:

          enabled: detection-only

        # Note: --enable-rust is required for full SMB1/2 support. W/o rust

        # only minimal SMB1 support is available.

        smb:

          enabled: yes

          detection-ports:

            dp: 139, 445

          # Stream reassembly size for SMB streams. By default track it completely.

          #stream-depth: 0

        # Note: NFS parser depends on Rust support: pass --enable-rust

        # to configure.

        nfs:

          enabled: yes

        tftp:

          enabled: yes

        dns:

          # memcaps. Globally and per flow/state.

          #global-memcap: 16mb

          #state-memcap: 512kb

          # How many unreplied DNS requests are considered a flood.

          # If the limit is reached, app-layer-event:dns.flooded; will match.

          #request-flood: 500

          tcp:

            enabled: yes

            detection-ports:

              dp: 53

          udp:

            enabled: yes

            detection-ports:

              dp: 53

        http:

          enabled: yes

          # memcap: 64mb

          # default-config:           Used when no server-config matches

          #   personality:            List of personalities used by default

          #   request-body-limit:     Limit reassembly of request body for inspection

          #                           by http_client_body & pcre /P option.

          #   response-body-limit:    Limit reassembly of response body for inspection

          #                           by file_data, http_server_body & pcre /Q option.

          #   double-decode-path:     Double decode path section of the URI

          #   double-decode-query:    Double decode query section of the URI

          #   response-body-decompress-layer-limit:

          #                           Limit to how many layers of compression will be

          #                           decompressed. Defaults to 2.

          #

          # server-config:            List of server configurations to use if address matches

          #   address:                List of IP addresses or networks for this block

          #   personalitiy:           List of personalities used by this block

          #   request-body-limit:     Limit reassembly of request body for inspection

          #                           by http_client_body & pcre /P option.

          #   response-body-limit:    Limit reassembly of response body for inspection

          #                           by file_data, http_server_body & pcre /Q option.

          #   double-decode-path:     Double decode path section of the URI

          #   double-decode-query:    Double decode query section of the URI

          #

          #   uri-include-all:        Include all parts of the URI. By default the

          #                           'scheme', username/password, hostname and port

          #                           are excluded. Setting this option to true adds

          #                           all of them to the normalized uri as inspected

          #                           by http_uri, urilen, pcre with /U and the other

          #                           keywords that inspect the normalized uri.

          #                           Note that this does not affect http_raw_uri.

          #                           Also, note that including all was the default in

          #                           1.4 and 2.0beta1.

          #

          #   meta-field-limit:       Hard size limit for request and response size

          #                           limits. Applies to request line and headers,

          #                           response line and headers. Does not apply to

          #                           request or response bodies. Default is 18k.

          #                           If this limit is reached an event is raised.

          #

          # Currently Available Personalities:

          #   Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,

          #   IIS_7_0, IIS_7_5, Apache_2

          libhtp:

             default-config:

               personality: IDS

               # Can be specified in kb, mb, gb.  Just a number indicates

               # it's in bytes.

               request-body-limit: 100kb

               response-body-limit: 100kb

               # inspection limits

               request-body-minimal-inspect-size: 32kb

               request-body-inspect-window: 4kb

               response-body-minimal-inspect-size: 40kb

               response-body-inspect-window: 16kb

               # response body decompression (0 disables)

               response-body-decompress-layer-limit: 2

               # auto will use http-body-inline mode in IPS mode, yes or no set it statically

               http-body-inline: auto

               # Decompress SWF files.

               # 2 types: 'deflate', 'lzma', 'both' will decompress deflate and lzma

               # compress-depth:

               # Specifies the maximum amount of data to decompress,

               # set 0 for unlimited.

               # decompress-depth:

               # Specifies the maximum amount of decompressed data to obtain,

               # set 0 for unlimited.

               swf-decompression:

                 enabled: yes

                 type: both

                 compress-depth: 0

                 decompress-depth: 0

               # Take a random value for inspection sizes around the specified value.

               # This lower the risk of some evasion technics but could lead

               # detection change between runs. It is set to 'yes' by default.

               #randomize-inspection-sizes: yes

               # If randomize-inspection-sizes is active, the value of various

               # inspection size will be choosen in the [1 - range%, 1 + range%]

               # range

               # Default value of randomize-inspection-range is 10.

               #randomize-inspection-range: 10

               # decoding

               double-decode-path: no

               double-decode-query: no

               # LZMA decompression memory limit. Disabled by default.

               #lzma-memlimit: 1 Mb

               #lzma-enabled: no

             server-config:

               #- apache:

               #    address: [192.168.1.0/24, 127.0.0.0/8, "::1"]

               #    personality: Apache_2

               #    # Can be specified in kb, mb, gb.  Just a number indicates

               #    # it's in bytes.

               #    request-body-limit: 4096

               #    response-body-limit: 4096

               #    double-decode-path: no

               #    double-decode-query: no

               #- iis7:

               #    address:

               #      - 192.168.0.0/24

               #      - 192.168.10.0/24

               #    personality: IIS_7_0

               #    # Can be specified in kb, mb, gb.  Just a number indicates

               #    # it's in bytes.

               #    request-body-limit: 4096

               #    response-body-limit: 4096

               #    double-decode-path: no

               #    double-decode-query: no

        # Note: Modbus probe parser is minimalist due to the poor significant field

        # Only Modbus message length (greater than Modbus header length)

        # And Protocol ID (equal to 0) are checked in probing parser

        # It is important to enable detection port and define Modbus port

        # to avoid false positive

        modbus:

          # How many unreplied Modbus requests are considered a flood.

          # If the limit is reached, app-layer-event:modbus.flooded; will match.

          #request-flood: 500

          enabled: no

          detection-ports:

            dp: 502

          # According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it

          # is recommended to keep the TCP connection opened with a remote device

          # and not to open and close it for each MODBUS/TCP transaction. In that

          # case, it is important to set the depth of the stream reassembling as

          # unlimited (stream.reassembly.depth: 0)

          # Stream reassembly size for modbus. By default track it completely.

          stream-depth: 0

        # DNP3

        dnp3:

          enabled: no

          detection-ports:

            dp: 20000

        # SCADA EtherNet/IP and CIP protocol support

        enip:

          enabled: no

          detection-ports:

            dp: 44818

            sp: 44818

        # Note: parser depends on Rust support

        ntp:

          enabled: yes

        dhcp:

          enabled: yes

    # Limit for the maximum number of asn1 frames to decode (default 256)

    asn1-max-frames: 256

    ##############################################################################

    ##

    ## Advanced settings below

    ##

    ##############################################################################

    ##

    ## Run Options

    ##

    # Run suricata as user and group.

    #run-as:

    #  user: suri

    #  group: suri

    # Some logging module will use that name in event as identifier. The default

    # value is the hostname

    #sensor-name: suricata

    # Default location of the pid file. The pid file is only used in

    # daemon mode (start Suricata with -D). If not running in daemon mode

    # the --pidfile command line option must be used to create a pid file.

    #pid-file: /var/run/suricata.pid

    # Daemon working directory

    # Suricata will change directory to this one if provided

    # Default: "/"

    #daemon-directory: "/"

    # Umask.

    # Suricata will use this umask if it is provided. By default it will use the

    # umask passed on by the shell.

    #umask: 022

    # Suricata core dump configuration. Limits the size of the core dump file to

    # approximately max-dump. The actual core dump size will be a multiple of the

    # page size. Core dumps that would be larger than max-dump are truncated. On

    # Linux, the actual core dump size may be a few pages larger than max-dump.

    # Setting max-dump to 0 disables core dumping.

    # Setting max-dump to 'unlimited' will give the full core dump file.

    # On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size

    # to be 'unlimited'.

    coredump:

      max-dump: unlimited

    # If Suricata box is a router for the sniffed networks, set it to 'router'. If

    # it is a pure sniffing setup, set it to 'sniffer-only'.

    # If set to auto, the variable is internally switch to 'router' in IPS mode

    # and 'sniffer-only' in IDS mode.

    # This feature is currently only used by the reject* keywords.

    host-mode: auto

    # Number of packets preallocated per thread. The default is 1024. A higher number 

    # will make sure each CPU will be more easily kept busy, but may negatively 

    # impact caching.

    max-pending-packets: 6000

    # Runmode the engine should use. Please check --list-runmodes to get the available

    # runmodes for each packet acquisition method. Defaults to "autofp" (auto flow pinned

    # load balancing).

    runmode: workers

    # Specifies the kind of flow load balancer used by the flow pinned autofp mode.

    #

    # Supported schedulers are:

    #

    # round-robin       - Flows assigned to threads in a round robin fashion.

    # active-packets    - Flows assigned to threads that have the lowest number of

    #                     unprocessed packets (default).

    # hash              - Flow allocated using the address hash. More of a random

    #                     technique. Was the default in Suricata 1.2.1 and older.

    #

    #autofp-scheduler: active-packets

    # Preallocated size for packet. Default is 1514 which is the classical

    # size for pcap on ethernet. You should adjust this value to the highest

    # packet size (MTU + hardware header) on your system.

    default-packet-size: 2000

    # Unix command socket can be used to pass commands to Suricata.

    # An external tool can then connect to get information from Suricata

    # or trigger some modifications of the engine. Set enabled to yes

    # to activate the feature. In auto mode, the feature will only be

    # activated in live capture mode. You can use the filename variable to set

    # the file name of the socket.

    unix-command:

      enabled: auto

      #filename: custom.socket

    # Magic file. The extension .mgc is added to the value here.

    #magic-file: /usr/share/file/magic

    #magic-file: 

    # GeoIP2 database file. Specify path and filename of GeoIP2 database

    # if using rules with "geoip" rule option.

    #geoip-database: /usr/local/share/GeoLite2/GeoLite2-Country.mmdb

    legacy:

      uricontent: enabled

    ##

    ## Detection settings

    ##

    # Set the order of alerts based on actions

    # The default order is pass, drop, reject, alert

    # action-order:

    #   - pass

    #   - drop

    #   - reject

    #   - alert

    # IP Reputation

    #reputation-categories-file: /etc/suricata/iprep/categories.txt

    #default-reputation-path: /etc/suricata/iprep

    #reputation-files:

    # - reputation.list

    # When run with the option --engine-analysis, the engine will read each of

    # the parameters below, and print reports for each of the enabled sections

    # and exit.  The reports are printed to a file in the default log dir

    # given by the parameter "default-log-dir", with engine reporting

    # subsection below printing reports in its own report file.

    engine-analysis:

      # enables printing reports for fast-pattern for every rule.

      rules-fast-pattern: yes

      # enables printing reports for each rule

      rules: yes

    #recursion and match limits for PCRE where supported

    pcre:

      match-limit: 3500

      match-limit-recursion: 1500

    ##

    ## Advanced Traffic Tracking and Reconstruction Settings

    ##

    # Host specific policies for defragmentation and TCP stream

    # reassembly. The host OS lookup is done using a radix tree, just

    # like a routing table so the most specific entry matches.

    host-os-policy:

      # Make the default policy windows.

      windows: []

      bsd: []

      bsd-right: []

      old-linux: []

      linux: [0.0.0.0/0]

      old-solaris: []

      solaris: []

      hpux10: []

      hpux11: []

      irix: []

      macos: []

      vista: []

      windows2k3: []

    # Defrag settings:

    defrag:

      memcap: 32mb

      hash-size: 65536

      trackers: 65535 # number of defragmented flows to follow

      max-frags: 65535 # number of fragments to keep (higher than trackers)

      prealloc: yes

      timeout: 60

    # Enable defrag per host settings

    #  host-config:

    #

    #    - dmz:

    #        timeout: 30

    #        address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]

    #

    #    - lan:

    #        timeout: 45

    #        address:

    #          - 192.168.0.0/24

    #          - 192.168.10.0/24

    #          - 172.16.14.0/24

    # Flow settings:

    # By default, the reserved memory (memcap) for flows is 32MB. This is the limit

    # for flow allocation inside the engine. You can change this value to allow

    # more memory usage for flows.

    # The hash-size determine the size of the hash used to identify flows inside

    # the engine, and by default the value is 65536.

    # At the startup, the engine can preallocate a number of flows, to get a better

    # performance. The number of flows preallocated is 10000 by default.

    # emergency-recovery is the percentage of flows that the engine need to

    # prune before unsetting the emergency state. The emergency state is activated

    # when the memcap limit is reached, allowing to create new flows, but

    # pruning them with the emergency timeouts (they are defined below).

    # If the memcap is reached, the engine will try to prune flows

    # with the default timeouts. If it doesn't find a flow to prune, it will set

    # the emergency bit and it will try again with more aggressive timeouts.

    # If that doesn't work, then it will try to kill the last time seen flows

    # not in use.

    # The memcap can be specified in kb, mb, gb.  Just a number indicates it's

    # in bytes.

    flow:

      memcap: 128mb

      hash-size: 65536

      prealloc: 10000

      emergency-recovery: 30

      #managers: 1 # default to one flow manager

      #recyclers: 1 # default to one flow recycler thread

    # This option controls the use of vlan ids in the flow (and defrag)

    # hashing. Normally this should be enabled, but in some (broken)

    # setups where both sides of a flow are not tagged with the same vlan

    # tag, we can ignore the vlan id's in the flow hashing.

    vlan:

      use-for-tracking: true

    # Specific timeouts for flows. Here you can specify the timeouts that the

    # active flows will wait to transit from the current state to another, on each

    # protocol. The value of "new" determine the seconds to wait after a handshake or

    # stream startup before the engine free the data of that flow it doesn't

    # change the state to established (usually if we don't receive more packets

    # of that flow). The value of "established" is the amount of

    # seconds that the engine will wait to free the flow if it spend that amount

    # without receiving new packets or closing the connection. "closed" is the

    # amount of time to wait after a flow is closed (usually zero). "bypassed"

    # timeout controls locally bypassed flows. For these flows we don't do any other

    # tracking. If no packets have been seen after this timeout, the flow is discarded.

    #

    # There's an emergency mode that will become active under attack circumstances,

    # making the engine to check flow status faster. This configuration variables

    # use the prefix "emergency-" and work similar as the normal ones.

    # Some timeouts doesn't apply to all the protocols, like "closed", for udp and

    # icmp.

    flow-timeouts:

      default:

        new: 30

        established: 300

        closed: 0

        bypassed: 100

        emergency-new: 10

        emergency-established: 100

        emergency-closed: 0

        emergency-bypassed: 50

      tcp:

        new: 60

        established: 600

        closed: 60

        bypassed: 100

        emergency-new: 5

        emergency-established: 100

        emergency-closed: 10

        emergency-bypassed: 50

      udp:

        new: 30

        established: 300

        bypassed: 100

        emergency-new: 10

        emergency-established: 100

        emergency-bypassed: 50

      icmp:

        new: 30

        established: 300

        bypassed: 100

        emergency-new: 10

        emergency-established: 100

        emergency-bypassed: 50

    # Stream engine settings. Here the TCP stream tracking and reassembly

    # engine is configured.

    #

    # stream:

    #   memcap: 32mb                # Can be specified in kb, mb, gb.  Just a

    #                               # number indicates it's in bytes.

    #   checksum-validation: yes    # To validate the checksum of received

    #                               # packet. If csum validation is specified as

    #                               # "yes", then packet with invalid csum will not

    #                               # be processed by the engine stream/app layer.

    #                               # Warning: locally generated traffic can be

    #                               # generated without checksum due to hardware offload

    #                               # of checksum. You can control the handling of checksum

    #                               # on a per-interface basis via the 'checksum-checks'

    #                               # option

    #   prealloc-sessions: 2k       # 2k sessions prealloc'd per stream thread

    #   midstream: false            # don't allow midstream session pickups

    #   async-oneside: false        # don't enable async stream handling

    #   inline: no                  # stream inline mode

    #   drop-invalid: yes           # in inline mode, drop packets that are invalid with regards to streaming engine

    #   max-synack-queued: 5        # Max different SYN/ACKs to queue

    #   bypass: no                  # Bypass packets when stream.depth is reached

    #

    #   reassembly:

    #     memcap: 64mb              # Can be specified in kb, mb, gb.  Just a number

    #                               # indicates it's in bytes.

    #     depth: 1mb                # Can be specified in kb, mb, gb.  Just a number

    #                               # indicates it's in bytes.

    #     toserver-chunk-size: 2560 # inspect raw stream in chunks of at least

    #                               # this size.  Can be specified in kb, mb,

    #                               # gb.  Just a number indicates it's in bytes.

    #     toclient-chunk-size: 2560 # inspect raw stream in chunks of at least

    #                               # this size.  Can be specified in kb, mb,

    #                               # gb.  Just a number indicates it's in bytes.

    #     randomize-chunk-size: yes # Take a random value for chunk size around the specified value.

    #                               # This lower the risk of some evasion technics but could lead

    #                               # detection change between runs. It is set to 'yes' by default.

    #     randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is

    #                               # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size

    #                               # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same

    #                               # calculation for toclient-chunk-size.

    #                               # Default value of randomize-chunk-range is 10.

    #

    #     raw: yes                  # 'Raw' reassembly enabled or disabled.

    #                               # raw is for content inspection by detection

    #                               # engine.

    #

    #     segment-prealloc: 2048    # number of segments preallocated per thread

    #

    #     check-overlap-different-data: true|false

    #                               # check if a segment contains different data

    #                               # than what we've already seen for that

    #                               # position in the stream.

    #                               # This is enabled automatically if inline mode

    #                               # is used or when stream-event:reassembly_overlap_different_data;

    #                               # is used in a rule.

    #

    stream:

      memcap: 64mb

      checksum-validation: yes      # reject wrong csums

      inline: yes                  # auto will use inline mode in IPS mode, yes or no set it statically

      reassembly:

        memcap: 256mb

        depth: 1mb                  # reassemble 1mb into a stream

        toserver-chunk-size: 2560

        toclient-chunk-size: 2560

        randomize-chunk-size: yes

        #randomize-chunk-range: 10

        #raw: yes

        #segment-prealloc: 2048

        #check-overlap-different-data: true

    # Host table:

    #

    # Host table is used by tagging and per host thresholding subsystems.

    #

    host:

      hash-size: 4096

      prealloc: 1000

      memcap: 32mb

    # IP Pair table:

    #

    # Used by xbits 'ippair' tracking.

    #

    #ippair:

    #  hash-size: 4096

    #  prealloc: 1000

    #  memcap: 32mb

    # Decoder settings

    decoder:

      # Teredo decoder is known to not be completely accurate

      # as it will sometimes detect non-teredo as teredo.

      teredo:

        enabled: true

      # VXLAN decoder is assigned to up to 4 UDP ports. By default only the

      # IANA assigned port 4789 is enabled.

      vxlan:

        enabled: false

        ports: $VXLAN_PORTS # syntax: '8472, 4789'

    ##

    ## Performance tuning and profiling

    ##

    # The detection engine builds internal groups of signatures. The engine

    # allow us to specify the profile to use for them, to manage memory on an

    # efficient way keeping a good performance. For the profile keyword you

    # can use the words "low", "medium", "high" or "custom". If you use custom

    # make sure to define the values at "- custom-values" as your convenience.

    # Usually you would prefer medium/high/low.

    #

    # "sgh mpm-context", indicates how the staging should allot mpm contexts for

    # the signature groups.  "single" indicates the use of a single context for

    # all the signature group heads.  "full" indicates a mpm-context for each

    # group head.  "auto" lets the engine decide the distribution of contexts

    # based on the information the engine gathers on the patterns from each

    # group head.

    #

    # The option inspection-recursion-limit is used to limit the recursive calls

    # in the content inspection code.  For certain payload-sig combinations, we

    # might end up taking too much time in the content inspection code.

    # If the argument specified is 0, the engine uses an internally defined

    # default limit.  On not specifying a value, we use no limits on the recursion.

    detect:

      profile: custom

      custom-values:

        toclient-groups: 200

        toserver-groups: 200

      sgh-mpm-context: auto

      inspection-recursion-limit: 3000

      # If set to yes, the loading of signatures will be made after the capture

      # is started. This will limit the downtime in IPS mode.

      #delayed-detect: yes

      prefilter:

        # default prefiltering setting. "mpm" only creates MPM/fast_pattern

        # engines. "auto" also sets up prefilter engines for other keywords.

        # Use --list-keywords=all to see which keywords support prefiltering.

        default: mpm

      # the grouping values above control how many groups are created per

      # direction. Port whitelisting forces that port to get it's own group.

      # Very common ports will benefit, as well as ports with many expensive

      # rules.

      grouping:

        #tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080

        #udp-whitelist: 53, 135, 5060

      profiling:

        # Log the rules that made it past the prefilter stage, per packet

        # default is off. The threshold setting determines how many rules

        # must have made it past pre-filter for that rule to trigger the

        # logging.

        #inspect-logging-threshold: 200

        grouping:

          dump-to-disk: false

          include-rules: false      # very verbose

          include-mpm-stats: false

    # Select the multi pattern algorithm you want to run for scan/search the

    # in the engine.

    #

    # The supported algorithms are:

    # "ac"      - Aho-Corasick, default implementation

    # "ac-bs"   - Aho-Corasick, reduced memory implementation

    # "ac-ks"   - Aho-Corasick, "Ken Steele" variant

    # "hs"      - Hyperscan, available when built with Hyperscan support

    #

    # The default mpm-algo value of "auto" will use "hs" if Hyperscan is

    # available, "ac" otherwise.

    #

    # The mpm you choose also decides the distribution of mpm contexts for

    # signature groups, specified by the conf - "detect.sgh-mpm-context".

    # Selecting "ac" as the mpm would require "detect.sgh-mpm-context"

    # to be set to "single", because of ac's memory requirements, unless the

    # ruleset is small enough to fit in one's memory, in which case one can

    # use "full" with "ac".  Rest of the mpms can be run in "full" mode.

    mpm-algo: auto

    # Select the matching algorithm you want to use for single-pattern searches.

    #

    # Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only

    # available if Suricata has been built with Hyperscan support).

    #

    # The default of "auto" will use "hs" if available, otherwise "bm".

    spm-algo: auto

    # Suricata is multi-threaded. Here the threading can be influenced.

    threading:

      set-cpu-affinity: no

      # Tune cpu affinity of threads. Each family of threads can be bound

      # on specific CPUs.

      #

      # These 2 apply to the all runmodes:

      # management-cpu-set is used for flow timeout handling, counters

      # worker-cpu-set is used for 'worker' threads

      #

      # Additionally, for autofp these apply:

      # receive-cpu-set is used for capture threads

      # verdict-cpu-set is used for IPS verdict threads

      #

      cpu-affinity:

        - management-cpu-set:

            cpu: [ 0 ]  # include only these CPUs in affinity settings

        - receive-cpu-set:

            cpu: [ 0 ]  # include only these CPUs in affinity settings

        - worker-cpu-set:

            cpu: [ "all" ]

            mode: "exclusive"

            # Use explicitely 3 threads and don't compute number by using

            # detect-thread-ratio variable:

            # threads: 3

            prio:

              low: [ 0 ]

              medium: [ "1-2" ]

              high: [ 3 ]

              default: "medium"

        #- verdict-cpu-set:

        #    cpu: [ 0 ]

        #    prio:

        #      default: "high"

      #

      # By default Suricata creates one "detect" thread per available CPU/CPU core.

      # This setting allows controlling this behaviour. A ratio setting of 2 will

      # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this

      # will result in 4 detect threads. If values below 1 are used, less threads

      # are created. So on a dual core CPU a setting of 0.5 results in 1 detect

      # thread being created. Regardless of the setting at a minimum 1 detect

      # thread will always be created.

      #

      detect-thread-ratio: 1.0

    # Luajit has a strange memory requirement, it's 'states' need to be in the

    # first 2G of the process' memory.

    #

    # 'luajit.states' is used to control how many states are preallocated.

    # State use: per detect script: 1 per detect thread. Per output script: 1 per

    # script.

    luajit:

      states: 128

    # Profiling settings. Only effective if Suricata has been built with the

    # the --enable-profiling configure flag.

    #

    profiling:

      # Run profiling for every xth packet. The default is 1, which means we

      # profile every packet. If set to 1000, one packet is profiled for every

      # 1000 received.

      #sample-rate: 1000

      # rule profiling

      rules:

        # Profiling can be disabled here, but it will still have a

        # performance impact if compiled in.

        enabled: yes

        filename: rule_perf.log

        append: yes

        # Sort options: ticks, avgticks, checks, matches, maxticks

        # If commented out all the sort options will be used.

        #sort: avgticks

        # Limit the number of sids for which stats are shown at exit (per sort).

        limit: 10

        # output to json

        json: yes

      # per keyword profiling

      keywords:

        enabled: yes

        filename: keyword_perf.log

        append: yes

      prefilter:

        enabled: yes

        filename: prefilter_perf.log

        append: yes

      # per rulegroup profiling

      rulegroups:

        enabled: yes

        filename: rule_group_perf.log

        append: yes

      # packet profiling

      packets:

        # Profiling can be disabled here, but it will still have a

        # performance impact if compiled in.

        enabled: yes

        filename: packet_stats.log

        append: yes

        # per packet csv output

        csv:

          # Output can be disabled here, but it will still have a

          # performance impact if compiled in.

          enabled: no

          filename: packet_stats.csv

      # profiling of locking. Only available when Suricata was built with

      # --enable-profiling-locks.

      locks:

        enabled: no

        filename: lock_stats.log

        append: yes

      pcap-log:

        enabled: no

        filename: pcaplog_stats.log

        append: yes

    ##

    ## Netfilter integration

    ##

    # When running in NFQ inline mode, it is possible to use a simulated

    # non-terminal NFQUEUE verdict.

    # This permit to do send all needed packet to Suricata via this a rule:

    #        iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE

    # And below, you can have your standard filtering ruleset. To activate

    # this mode, you need to set mode to 'repeat'

    # If you want packet to be sent to another queue after an ACCEPT decision

    # set mode to 'route' and set next-queue value.

    # On linux >= 3.1, you can set batchcount to a value > 1 to improve performance

    # by processing several packets before sending a verdict (worker runmode only).

    # On linux >= 3.6, you can set the fail-open option to yes to have the kernel

    # accept the packet if Suricata is not able to keep pace.

    # bypass mark and mask can be used to implement NFQ bypass. If bypass mark is

    # set then the NFQ bypass is activated. Suricata will set the bypass mark/mask

    # on packet of a flow that need to be bypassed. The Nefilter ruleset has to

    # directly accept all packets of a flow once a packet has been marked.

    nfq:

    #  mode: accept

    #  repeat-mark: 1

    #  repeat-mask: 1

    #  bypass-mark: 1

    #  bypass-mask: 1

    #  route-queue: 2

    #  batchcount: 20

    #  fail-open: yes

    #nflog support

    nflog:

        # netlink multicast group

        # (the same as the iptables --nflog-group param)

        # Group 0 is used by the kernel, so you can't use it

      - group: 2

        # netlink buffer size

        buffer-size: 18432

        # put default value here

      - group: default

        # set number of packet to queue inside kernel

        qthreshold: 1

        # set the delay before flushing packet in the queue inside kernel

        qtimeout: 100

        # netlink max buffer size

        max-size: 20000

    ##

    ## Advanced Capture Options

    ##

    # general settings affecting packet capture

    capture:

      # disable NIC offloading. It's restored when Suricata exits.

      # Enabled by default.

      #disable-offloading: false

      #

      # disable checksum validation. Same as setting '-k none' on the

      # commandline.

      #checksum-validation: none

    # Netmap support

    #

    # Netmap operates with NIC directly in driver, so you need FreeBSD which have

    # built-in netmap support or compile and install netmap module and appropriate

    # NIC driver on your Linux system.

    # To reach maximum throughput disable all receive-, segmentation-,

    # checksum- offloadings on NIC.

    # Disabling Tx checksum offloading is *required* for connecting OS endpoint

    # with NIC endpoint.

    # You can find more information at https://github.com/luigirizzo/netmap

    #

    netmap:

       # To specify OS endpoint add plus sign at the end (e.g. "eth0+")

     - interface: eth2

       # Number of receive threads. "auto" uses number of RSS queues on interface.

       #threads: auto

       # You can use the following variables to activate netmap tap or IPS mode.

       # If copy-mode is set to ips or tap, the traffic coming to the current

       # interface will be copied to the copy-iface interface. If 'tap' is set, the

       # copy is complete. If 'ips' is set, the packet matching a 'drop' action

       # will not be copied.

       # To specify the OS as the copy-iface (so the OS can route packets, or forward

       # to a service running on the same machine) add a plus sign at the end

       # (e.g. "copy-iface: eth0+"). Don't forget to set up a symmetrical eth0+ -> eth0

       # for return packets. Hardware checksumming must be *off* on the interface if

       # using an OS endpoint (e.g. 'ifconfig eth0 -rxcsum -txcsum -rxcsum6 -txcsum6' for FreeBSD

       # or 'ethtool -K eth0 tx off rx off' for Linux).

       #copy-mode: tap

       #copy-iface: eth3

       # Set to yes to disable promiscuous mode

       # disable-promisc: no

       # Choose checksum verification mode for the interface. At the moment

       # of the capture, some packets may be with an invalid checksum due to

       # offloading to the network card of the checksum computation.

       # Possible values are:

       #  - yes: checksum validation is forced

       #  - no: checksum validation is disabled

       #  - auto: Suricata uses a statistical approach to detect when

       #  checksum off-loading is used.

       # Warning: 'checksum-validation' must be set to yes to have any validation

       #checksum-checks: auto

       # BPF filter to apply to this interface. The pcap filter syntax apply here.

       #bpf-filter: port 80 or udp

     #- interface: eth3

       #threads: auto

       #copy-mode: tap

       #copy-iface: eth2

       # Put default values here

     - interface: default

    # PF_RING configuration. for use with native PF_RING support

    # for more info see http://www.ntop.org/products/pf_ring/

    pfring:

      - interface: eth0

        # Number of receive threads. If set to 'auto' Suricata will first try

        # to use CPU (core) count and otherwise RSS queue count.

        threads: auto

        # Default clusterid.  PF_RING will load balance packets based on flow.

        # All threads/processes that will participate need to have the same

        # clusterid.

        cluster-id: 99

        # Default PF_RING cluster type. PF_RING can load balance per flow.

        # Possible values are cluster_flow or cluster_round_robin.

        cluster-type: cluster_flow

        # bpf filter for this interface

        #bpf-filter: tcp

        # If bypass is set then the PF_RING hw bypass is activated, when supported

        # by the interface in use. Suricata will instruct the interface to bypass

        # all future packets for a flow that need to be bypassed.

        #bypass: yes

        # Choose checksum verification mode for the interface. At the moment

        # of the capture, some packets may be with an invalid checksum due to

        # offloading to the network card of the checksum computation.

        # Possible values are:

        #  - rxonly: only compute checksum for packets received by network card.

        #  - yes: checksum validation is forced

        #  - no: checksum validation is disabled

        #  - auto: Suricata uses a statistical approach to detect when

        #  checksum off-loading is used. (default)

        # Warning: 'checksum-validation' must be set to yes to have any validation

        #checksum-checks: auto

      # Second interface

      #- interface: eth1

      #  threads: 3

      #  cluster-id: 93

      #  cluster-type: cluster_flow

      # Put default values here

      - interface: default

        #threads: 2

    # For FreeBSD ipfw(8) divert(4) support.

    # Please make sure you have ipfw_load="YES" and ipdivert_load="YES"

    # in /etc/loader.conf or kldload'ing the appropriate kernel modules.

    # Additionally, you need to have an ipfw rule for the engine to see

    # the packets from ipfw.  For Example:

    #

    #   ipfw add 100 divert 8000 ip from any to any

    #

    # The 8000 above should be the same number you passed on the command

    # line, i.e. -d 8000

    #

    ipfw:

      # Reinject packets at the specified ipfw rule number.  This config

      # option is the ipfw rule number AT WHICH rule processing continues

      # in the ipfw processing system after the engine has finished

      # inspecting the packet for acceptance.  If no rule number is specified,

      # accepted packets are reinjected at the divert rule which they entered

      # and IPFW rule processing continues.  No check is done to verify

      # this will rule makes sense so care must be taken to avoid loops in ipfw.

      #

      ## The following example tells the engine to reinject packets

      # back into the ipfw firewall AT rule number 5500:

      #

      # ipfw-reinjection-rule-number: 5500

    napatech:

        # The Host Buffer Allowance for all streams

        # (-1 = OFF, 1 - 100 = percentage of the host buffer that can be held back)

        # This may be enabled when sharing streams with another application.

        # Otherwise, it should be turned off.

        hba: -1

        # use_all_streams set to "yes" will query the Napatech service for all configured

        # streams and listen on all of them. When set to "no" the streams config array

        # will be used.

        use-all-streams: yes

        # The streams to listen on.  This can be either:

        #   a list of individual streams (e.g. streams: [0,1,2,3])

        # or

        #   a range of streams (e.g. streams: ["0-3"])

        streams: ["0-3"]

    # Tilera mpipe configuration. for use on Tilera TILE-Gx.

    mpipe:

      # Load balancing modes: "static", "dynamic", "sticky", or "round-robin".

      load-balance: dynamic

      # Number of Packets in each ingress packet queue. Must be 128, 512, 2028 or 65536

      iqueue-packets: 2048

      # List of interfaces we will listen on.

      inputs:

      - interface: xgbe2

      - interface: xgbe3

      - interface: xgbe4

      # Relative weight of memory for packets of each mPipe buffer size.

      stack:

        size128: 0

        size256: 9

        size512: 0

        size1024: 0

        size1664: 7

        size4096: 0

        size10386: 0

        size16384: 0

    ##

    ## Configure Suricata to load Suricata-Update managed rules.

    ##

    ## If this section is completely commented out move down to the "Advanced rule

    ## file configuration".

    ##

    ##default-rule-path: /var/lib/suricata/rules

    ##rule-files:

    ## - suricata.rules

    ##

    ## Advanced rule file configuration.

    ##

    ## If this section is completely commented out then your configuration

    ## is setup for suricata-update as it was most likely bundled and

    ## installed with Suricata.

    ##

    default-rule-path: /etc/suricata/rules

    rule-files:

     - tor.rules

     - scan.rules

     - activex.rules

     - app-layer-events.rules

     - attack_response.rules

     - botcc.portgrouped.rules

     - botcc.rules

     - chat.rules

     - ciarmy.rules

     - compromised.rules

     - current_events.rules

     - decoder-events.rules

     - dnp3-events.rules

     - dns-events.rules

     - dns.rules

     - dos.rules

     - drop.rules

     - dshield.rules

     - exploit.rules

     - ftp.rules

     - games.rules

     - http-events.rules

     - hunting.rules

     - icmp_info.rules

     - icmp.rules

     - imap.rules

     - inappropriate.rules

     - info.rules

     - ipsec-events.rules

     - kerberos-events.rules

     - malware.rules

     - misc.rules

     - mobile_malware.rules

     - netbios.rules

     - nfs-events.rules

     - ntp-events.rules

     - p2p.rules

     - policy.rules

     - pop3.rules

     - rpc.rules

     - scan.rules

     - shellcode.rules

     - smb-events.rules

     - smtp-events.rules

     - smtp.rules

     - snmp.rules

     - sql.rules

     - stream-events.rules

     - telnet.rules

     - tftp.rules

     - tls-events.rules

     - trojan.rules

     - user_agents.rules

     - voip.rules

     - web_client.rules

     - web_server.rules

     - web_specific_apps.rules

     - worm.rules

    ##

    ## Auxiliary configuration files.

    ##

    classification-file: /etc/suricata/classification.config

    reference-config-file: /etc/suricata/reference.config

    # threshold-file: /etc/suricata/threshold.config

    ##

    ## Include other configs

    ##

    # Includes.  Files included here will be handled as if they were

    # inlined in this configuration file.

    #include: include1.yaml

    #include: include2.yaml

(3-3/4)

Project

General

Profile

Suricata

Support #3377 » suricata.yaml