%YAML 1.1
---

# Suricata configuration file. In addition to the comments describing all
# options in this file, full documentation can be found at:
# https://redmine.openinfosecfoundation.org/projects/suricata/wiki/Suricatayaml

##
## Step 1: inform Suricata about your network
##

vars:
  # more specifc is better for alert accuracy and performance
  address-groups:
    HOME_NET: "[192.168.1.0/24]"
    #HOME_NET: "[192.168.0.0/16]"
    #HOME_NET: "[10.0.0.0/8]"
    #HOME_NET: "[172.16.0.0/12]"
    #HOME_NET: "any"

    EXTERNAL_NET: "!$HOME_NET"
    #EXTERNAL_NET: "any"

    HTTP_SERVERS: "$HOME_NET"
    SMTP_SERVERS: "$HOME_NET"
    SQL_SERVERS: "$HOME_NET"
    DNS_SERVERS: "$HOME_NET"
    TELNET_SERVERS: "$HOME_NET"
    AIM_SERVERS: "$EXTERNAL_NET"
    DNP3_SERVER: "$HOME_NET"
    DNP3_CLIENT: "$HOME_NET"
    MODBUS_CLIENT: "$HOME_NET"
    MODBUS_SERVER: "$HOME_NET"
    ENIP_CLIENT: "$HOME_NET"
    ENIP_SERVER: "$HOME_NET"

  port-groups:
    HTTP_PORTS: "80"
    SHELLCODE_PORTS: "!80"
    ORACLE_PORTS: 1521
    SSH_PORTS: 22
    DNP3_PORTS: 20000
    MODBUS_PORTS: 502


##
## Step 2: select the rules to enable or disable
##

default-rule-path: /usr/local/etc/suricata/rules
rule-files:
- etpro-all.rules
#- local.rules

#  - botcc.rules
#  # - botcc.portgrouped.rules
#  - ciarmy.rules
#  - compromised.rules
#  - drop.rules
#  - dshield.rules
# # - emerging-activex.rules
#  - emerging-attack_response.rules
#  - emerging-chat.rules
#  - emerging-current_events.rules
#  - emerging-dns.rules
#  - emerging-dos.rules
#  - emerging-exploit.rules
#  - emerging-ftp.rules
# # - emerging-games.rules
# # - emerging-icmp_info.rules
# # - emerging-icmp.rules
#  - emerging-imap.rules
# # - emerging-inappropriate.rules
# # - emerging-info.rules
#  - emerging-malware.rules
#  - emerging-misc.rules
#  - emerging-mobile_malware.rules
#  - emerging-netbios.rules
#  - emerging-p2p.rules
#  - emerging-policy.rules
#  - emerging-pop3.rules
#  - emerging-rpc.rules
# # - emerging-scada.rules
# # - emerging-scada_special.rules
#  - emerging-scan.rules
# # - emerging-shellcode.rules
#  - emerging-smtp.rules
#  - emerging-snmp.rules
#  - emerging-sql.rules
#  - emerging-telnet.rules
#  - emerging-tftp.rules
#  - emerging-trojan.rules
#  - emerging-user_agents.rules
#  - emerging-voip.rules
#  - emerging-web_client.rules
#  - emerging-web_server.rules
# # - emerging-web_specific_apps.rules
#  - emerging-worm.rules
#  - tor.rules
# # - decoder-events.rules # available in suricata sources under rules dir
# # - stream-events.rules  # available in suricata sources under rules dir
#  - http-events.rules    # available in suricata sources under rules dir
#  - smtp-events.rules    # available in suricata sources under rules dir
#  - dns-events.rules     # available in suricata sources under rules dir
#  - tls-events.rules     # available in suricata sources under rules dir
# # - modbus-events.rules  # available in suricata sources under rules dir
# # - app-layer-events.rules  # available in suricata sources under rules dir
# # - dnp3-events.rules       # available in suricata sources under rules dir

classification-file: /usr/local/etc/suricata/classification.config
reference-config-file: /usr/local/etc/suricata/reference.config
# threshold-file: /usr/local/etc/suricata/threshold.config


##
## Step 3: select outputs to enable
##

# The default logging directory.  Any log or output file will be
# placed here if its not specified with a full path name. This can be
# overridden with the -l command line parameter.
default-log-dir: /usr/local/var/log/suricata/

# global stats configuration
stats:
  enabled: no
  # The interval field (in seconds) controls at what interval
  # the loggers are invoked.
  interval: 8

# Configure the type of alert (and other) logging you would like.
outputs:
  # a line based alerts log similar to Snort's fast.log
  - fast:
      enabled: no
      filename: fast.log
      append: yes
      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

  # Extensible Event Format (nicknamed EVE) event log in JSON format
  - eve-log:
      enabled: yes
      filetype: regular
      filename: eve.json
      #prefix: "@cee: " # prefix to prepend to each log entry
      # the following are valid when type: syslog above
      #identity: "suricata"
      #facility: local5
      #level: Info ## possible levels: Emergency, Alert, Critical,
                   ## Error, Warning, Notice, Info, Debug
      #redis:
      #  server: 127.0.0.1
      #  port: 6379
      #  async: true ## if redis replies are read asynchronously
      #  mode: list ## possible values: list (default), channel
      #  key: suricata ## key or channel to use (default to suricata)
      # Redis pipelining set up. This will enable to only do a query every
      # 'batch-size' events. This should lower the latency induced by network
      # connection at the cost of some memory. There is no flushing implemented
      # so this setting as to be reserved to high traffic suricata.
      #  pipelining:
      #    enabled: yes ## set enable to yes to enable query pipelining
      #    batch-size: 10 ## number of entry to keep in buffer
      types:
          #- alert:
          #-   # payload: yes             # enable dumping payload in Base64
          #-   # payload-buffer-size: 4kb # max size of payload buffer to output in eve-log
          #-   # payload-printable: yes   # enable dumping payload in printable (lossy) format
          #-   # packet: yes              # enable dumping of packet (without stream segments)
          #-   http: yes #yes                # enable dumping of http fields
          #-   tls:  yes #yes                 # enable dumping of tls fields
          #-   ssh:  no #yes                 # enable dumping of ssh fields
          #-   smtp: no #yes                # enable dumping of smtp fields
          #-   dnp3: no #yes                # enable dumping of DNP3 fields
          #-   vars: no #yes                # enable dumping of flowbits and other vars

          #-   # Enable the logging of tagged packets for rules using the
          #-   # "tag" keyword.
          #-   tagged-packets: yes

          #-   # HTTP X-Forwarded-For support by adding an extra field or overwriting
          #-   # the source or destination IP address (depending on flow direction)
          #-   # with the one reported in the X-Forwarded-For HTTP header. This is
          #-   # helpful when reviewing alerts for traffic that is being reverse
          #-   # or forward proxied.
          #-   xff:
          #-     enabled: no
          #-     # Two operation modes are available, "extra-data" and "overwrite".
          #-     mode: extra-data
          #-     # Two proxy deployments are supported, "reverse" and "forward". In
          #-     # a "reverse" deployment the IP address used is the last one, in a
          #-     # "forward" deployment the first IP address is used.
          #-     deployment: reverse
          #-     # Header name where the actual IP address will be reported, if more
          #-     # than one IP address is present, the last IP address will be the
          #-     # one taken into consideration.
          #-     header: X-Forwarded-For
        # - http:
        #     extended: yes     # enable this for extended logging information
        #     # custom allows additional http fields to be included in eve-log
        #     # the example below adds three additional fields when uncommented
        #     #custom: [Accept-Encoding, Accept-Language, Authorization]
        - dns:
            # control logging of queries and answers
            # default yes, no to disable
            query: yes     # enable logging of DNS queries
            answer: yes    # enable logging of DNS answers
            # control which RR types are logged
            # all enabled if custom not specified
            #custom: [a, aaaa, cname, mx, ns, ptr, txt]
            #custom: [a, aaaa, cname, mx, ptr, txt, ns]
        # - tls:
            #extended: yes     # enable this for extended logging information
            # output TLS transaction where the session is resumed using a
            # session id
            #session-resumption: no
            # custom allows to control which tls fields that are included
            # in eve-log
            #custom: [subject, issuer, session_resumed, serial, fingerprint, sni, version, not_before, not_after, certificate, chain]
            #custom: [subject, issuer, session_resumed, serial, fingerprint, sni, version, not_before, not_after, chain]
       #- files:
            #force-magic: yes   # force logging magic on all logged files
            # force logging of checksums, available hash functions are md5,
            # sha1 and sha256
            #force-hash: [sha1]
        #- drop:
        #    alerts: yes      # log alerts that caused drops
        #    flows: all       # start or all: 'start' logs only a single drop
        #                     # per flow direction. All logs each dropped pkt.
        #- smtp:
        #    #extended: yes # enable this for extended logging information
        #    # this includes: bcc, message-id, subject, x_mailer, user-agent
        #    # custom fields logging from the list:
        #    #  reply-to, bcc, message-id, subject, x-mailer, user-agent, received,
        #    #  x-originating-ip, in-reply-to, references, importance, priority,
        #    #  sensitivity, organization, content-md5, date
        #    #custom: [received, x-mailer, x-originating-ip, relays, reply-to, bcc]
        #    # output md5 of fields: body, subject
        #    # for the body you need to set app-layer.protocols.smtp.mime.body-md5
        #    # to yes
        #    #md5: [body, subject]

        #- dnp3
        #- nfs3
        #- ssh
        #- stats:
        #    totals: no       # stats for all threads merged together
        #    threads: no       # per thread stats
        #    deltas: no        # include delta values
        # bi-directional flows
        #- flow
        # uni-directional flows
        #- netflow
        # Vars log flowbits and other packet and flow vars
        #- vars

  # alert output for use with Barnyard2
  - unified2-alert:
      enabled: no
      filename: unified2.alert

      # File size limit.  Can be specified in kb, mb, gb.  Just a number
      # is parsed as bytes.
      #limit: 32mb

      # By default unified2 log files have the file creation time (in
      # unix epoch format) appended to the filename. Set this to yes to
      # disable this behaviour.
      #nostamp: no

      # Sensor ID field of unified2 alerts.
      #sensor-id: 0

      # Include payload of packets related to alerts. Defaults to true, set to
      # false if payload is not required.
      #payload: yes

      # HTTP X-Forwarded-For support by adding the unified2 extra header or
      # overwriting the source or destination IP address (depending on flow
      # direction) with the one reported in the X-Forwarded-For HTTP header.
      # This is helpful when reviewing alerts for traffic that is being reverse
      # or forward proxied.
      xff:
        enabled: no
        # Two operation modes are available, "extra-data" and "overwrite". Note
        # that in the "overwrite" mode, if the reported IP address in the HTTP
        # X-Forwarded-For header is of a different version of the packet
        # received, it will fall-back to "extra-data" mode.
        mode: extra-data
        # Two proxy deployments are supported, "reverse" and "forward". In
        # a "reverse" deployment the IP address used is the last one, in a
        # "forward" deployment the first IP address is used.
        deployment: reverse
        # Header name where the actual IP address will be reported, if more
        # than one IP address is present, the last IP address will be the
        # one taken into consideration.
        header: X-Forwarded-For

  # a line based log of HTTP requests (no alerts)
  - http-log:
      enabled: no
      filename: http.log
      append: yes
      #extended: yes     # enable this for extended logging information
      #custom: yes       # enabled the custom logging format (defined by customformat)
      #customformat: "%{%D-%H:%M:%S}t.%z %{X-Forwarded-For}i %H %m %h %u %s %B %a:%p -> %A:%P"
      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

  # a line based log of TLS handshake parameters (no alerts)
  - tls-log:
      enabled: no  # Log TLS connections.
      filename: tls.log # File to store TLS logs.
      append: yes
      #extended: yes     # Log extended information like fingerprint
      #custom: yes       # enabled the custom logging format (defined by customformat)
      #customformat: "%{%D-%H:%M:%S}t.%z %a:%p -> %A:%P %v %n %d %D"
      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'
      # output TLS transaction where the session is resumed using a
      # session id
      #session-resumption: no

  # output module to store certificates chain to disk
  - tls-store:
      enabled: no
      #certs-log-dir: certs # directory to store the certificates files

  # a line based log of DNS requests and/or replies (no alerts)
  - dns-log:
      enabled: no
      filename: dns.log
      append: yes
      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

  # Packet log... log packets in pcap format. 3 modes of operation: "normal"
  # "multi" and "sguil".
  #
  # In normal mode a pcap file "filename" is created in the default-log-dir,
  # or are as specified by "dir".
  # In multi mode, a file is created per thread. This will perform much
  # better, but will create multiple files where 'normal' would create one.
  # In multi mode the filename takes a few special variables:
  # - %n -- thread number
  # - %i -- thread id
  # - %t -- timestamp (secs or secs.usecs based on 'ts-format'
  # E.g. filename: pcap.%n.%t
  #
  # Note that it's possible to use directories, but the directories are not
  # created by Suricata. E.g. filename: pcaps/%n/log.%s will log into the
  # per thread directory.
  #
  # Also note that the limit and max-files settings are enforced per thread.
  # So the size limit when using 8 threads with 1000mb files and 2000 files
  # is: 8*1000*2000 ~ 16TiB.
  #
  # In Sguil mode "dir" indicates the base directory. In this base dir the
  # pcaps are created in th directory structure Sguil expects:
  #
  # $sguil-base-dir/YYYY-MM-DD/$filename.<timestamp>
  #
  # By default all packets are logged except:
  # - TCP streams beyond stream.reassembly.depth
  # - encrypted streams after the key exchange
  #
  - pcap-log:
      enabled: no
      filename: log.pcap

      # File size limit.  Can be specified in kb, mb, gb.  Just a number
      # is parsed as bytes.
      limit: 1000mb

      # If set to a value will enable ring buffer mode. Will keep Maximum of "max-files" of size "limit"
      max-files: 2000

      mode: normal # normal, multi or sguil.

      # Directory to place pcap files. If not provided the default log
      # directory will be used. Required for "sguil" mode.
      #dir: /nsm_data/

      #ts-format: usec # sec or usec second format (default) is filename.sec usec is filename.sec.usec
      use-stream-depth: no #If set to "yes" packets seen after reaching stream inspection depth are ignored. "no" logs all packets
      honor-pass-rules: no # If set to "yes", flows in which a pass rule matched will stopped being logged.

  # a full alerts log containing much information for signature writers
  # or for investigating suspected false positives.
  - alert-debug:
      enabled: no
      filename: alert-debug.log
      append: yes
      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

  # alert output to prelude (http://www.prelude-technologies.com/) only
  # available if Suricata has been compiled with --enable-prelude
  - alert-prelude:
      enabled: no
      profile: suricata
      log-packet-content: no
      log-packet-header: yes

  # Stats.log contains data from various counters of the suricata engine.
  - stats:
      enabled: no
      filename: stats.log
      totals: yes       # stats for all threads merged together
      threads: no       # per thread stats
      #null-values: yes  # print counters that have value 0

  # a line based alerts log similar to fast.log into syslog
  - syslog:
      enabled: no
      # reported identity to syslog. If ommited the program name (usually
      # suricata) will be used.
      #identity: "suricata"
      facility: local5
      #level: Info ## possible levels: Emergency, Alert, Critical,
                   ## Error, Warning, Notice, Info, Debug

  # a line based information for dropped packets in IPS mode
  - drop:
      enabled: no
      filename: drop.log
      append: yes
      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

  # output module to store extracted files to disk
  #
  # The files are stored to the log-dir in a format "file.<id>" where <id> is
  # an incrementing number starting at 1. For each file "file.<id>" a meta
  # file "file.<id>.meta" is created.
  #
  # File extraction depends on a lot of things to be fully done:
  # - file-store stream-depth. For optimal results, set this to 0 (unlimited)
  # - http request / response body sizes. Again set to 0 for optimal results.
  # - rules that contain the "filestore" keyword.
  - file-store:
      enabled: no       # set to yes to enable
      log-dir: ids-files # directory to store the files
      force-magic: no   # force logging magic on all stored files
      # force logging of checksums, available hash functions are md5,
      # sha1 and sha256
      #force-hash: [md5]
      force-filestore: yes # force storing of all files
      # override global stream-depth for sessions in which we want to
      # perform file extraction. Set to 0 for unlimited.
      stream-depth: 0
      #waldo: file.waldo # waldo file to store the file_id across runs
      # uncomment to disable meta file writing
      write-meta: no
      # uncomment the following variable to define how many files can
      # remain open for filestore by Suricata. Default value is 0 which
      # means files get closed after each write
      #max-open-files: 1000

  # output module to log files tracked in a easily parsable json format
  - file-log:
      enabled: no
      filename: files-json.log
      append: yes
      #filetype: regular # 'regular', 'unix_stream' or 'unix_dgram'

      force-magic: no   # force logging magic on all logged files
      # force logging of checksums, available hash functions are md5,
      # sha1 and sha256
      #force-hash: [md5]

  # Log TCP data after stream normalization
  # 2 types: file or dir. File logs into a single logfile. Dir creates
  # 2 files per TCP session and stores the raw TCP data into them.
  # Using 'both' will enable both file and dir modes.
  #
  # Note: limited by stream.depth
  - tcp-data:
      enabled: no
      type: file
      filename: tcp-data.log

  # Log HTTP body data after normalization, dechunking and unzipping.
  # 2 types: file or dir. File logs into a single logfile. Dir creates
  # 2 files per HTTP session and stores the normalized data into them.
  # Using 'both' will enable both file and dir modes.
  #
  # Note: limited by the body limit settings
  - http-body-data:
      enabled: no
      type: file
      filename: http-data.log

  # Lua Output Support - execute lua script to generate alert and event
  # output.
  # Documented at:
  # https://redmine.openinfosecfoundation.org/projects/suricata/wiki/Lua_Output
  - lua:
      enabled: no
      #scripts-dir: /etc/suricata/lua-output/
      scripts:
      #   - script1.lua

# Logging configuration.  This is not about logging IDS alerts/events, but
# output about what Suricata is doing, like startup messages, errors, etc.
logging:
  # The default log level, can be overridden in an output section.
  # Note that debug level logging will only be emitted if Suricata was
  # compiled with the --enable-debug configure option.
  #
  # This value is overriden by the SC_LOG_LEVEL env var.
  default-log-level: info #notice

  # The default output format.  Optional parameter, should default to
  # something reasonable if not provided.  Can be overriden in an
  # output section.  You can leave this out to get the default.
  #
  # This value is overriden by the SC_LOG_FORMAT env var.
  #default-log-format: "[%i] %t - (%f:%l) <%d> (%n) -- "
  #default-log-format: "%t [%f - %n] | "
  #    t:      Time, timestamp, time and date
  #                example: 15/10/2010 -- 11:40:07
  #    p:      Process ID. Suricata's whole processing consists of multiple threads.
  #    i:      Thread ID. ID of individual threads.
  #    m:      Thread module name. (Outputs, Detect etc.)
  #    d:      Log-level of specific log-event. (Error, info, debug etc.)
  #    f:      Filename. Name of C-file (source code) where log-event is generated.
  #    l:      Line-number within the filename, where the log-event is generated in the source-code.
  #    n:      Function-name in the C-code (source code).

  # A regex to filter output.  Can be overridden in an output section.
  # Defaults to empty (no filter).
  #
  # This value is overriden by the SC_LOG_OP_FILTER env var.
  default-output-filter:

  # Define your logging outputs.  If none are defined, or they are all
  # disabled you will get the default - console output.
  outputs:
  - console:
      enabled: yes
      # type: json
  - file:
      enabled: yes
      level: info
      filename: /usr/local/var/log/suricata/suricata.log
      # type: json
  - syslog:
      enabled: no
      facility: local5
      format: "[%i] <%d> -- "
      # type: json


##
## Step 4: configure common capture settings
##
## See "Advanced Capture Options" below for more options, including NETMAP
## and PF_RING.
##

# Linux high speed capture support
af-packet:
  - interface: eth0
    # Number of receive threads. "auto" uses the number of cores
    #threads: auto
    # Default clusterid. AF_PACKET will load balance packets based on flow.
    cluster-id: 99
    # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
    # This is only supported for Linux kernel > 3.1
    # possible value are:
    #  * cluster_round_robin: round robin load balancing
    #  * cluster_flow: all packets of a given flow are send to the same socket
    #  * cluster_cpu: all packets treated in kernel by a CPU are send to the same socket
    #  * cluster_qm: all packets linked by network card to a RSS queue are sent to the same
    #  socket. Requires at least Linux 3.14.
    #  * cluster_random: packets are sent randomly to sockets but with an equipartition.
    #  Requires at least Linux 3.14.
    #  * cluster_rollover: kernel rotates between sockets filling each socket before moving
    #  to the next. Requires at least Linux 3.10.
    # Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system
    # with capture card using RSS (require cpu affinity tuning and system irq tuning)
    cluster-type: cluster_flow
    # In some fragmentation case, the hash can not be computed. If "defrag" is set
    # to yes, the kernel will do the needed defragmentation before sending the packets.
    defrag: yes
    # After Linux kernel 3.10 it is possible to activate the rollover option: if a socket is
    # full then kernel will send the packet on the next socket with room available. This option
    # can minimize packet drop and increase the treated bandwidth on single intensive flow.
    #rollover: yes
    # To use the ring feature of AF_PACKET, set 'use-mmap' to yes
    #use-mmap: yes
    # Lock memory map to avoid it goes to swap. Be careful that over suscribing could lock
    # your system
    #mmap-locked: yes
    # Use tpacket_v3 capture mode, only active if use-mmap is true
    # Don't use it in IPS or TAP mode as it causes severe latency
    #tpacket-v3: yes
    # Ring size will be computed with respect to max_pending_packets and number
    # of threads. You can set manually the ring size in number of packets by setting
    # the following value. If you are using flow cluster-type and have really network
    # intensive single-flow you could want to set the ring-size independently of the number
    # of threads:
    #ring-size: 2048
    # Block size is used by tpacket_v3 only. It should set to a value high enough to contain
    # a decent number of packets. Size is in bytes so please consider your MTU. It should be
    # a power of 2 and it must be multiple of page size (usually 4096).
    #block-size: 32768
    # tpacket_v3 block timeout: an open block is passed to userspace if it is not
    # filled after block-timeout milliseconds.
    #block-timeout: 10
    # On busy system, this could help to set it to yes to recover from a packet drop
    # phase. This will result in some packets (at max a ring flush) being non treated.
    #use-emergency-flush: yes
    # recv buffer size, increase value could improve performance
    # buffer-size: 32768
    # Set to yes to disable promiscuous mode
    # disable-promisc: no
    # Choose checksum verification mode for the interface. At the moment
    # of the capture, some packets may be with an invalid checksum due to
    # offloading to the network card of the checksum computation.
    # Possible values are:
    #  - kernel: use indication sent by kernel for each packet (default)
    #  - yes: checksum validation is forced
    #  - no: checksum validation is disabled
    #  - auto: suricata uses a statistical approach to detect when
    #  checksum off-loading is used.
    # Warning: 'checksum-validation' must be set to yes to have any validation
    #checksum-checks: kernel
    # BPF filter to apply to this interface. The pcap filter syntax apply here.
    #bpf-filter: port 80 or udp
    # You can use the following variables to activate AF_PACKET tap or IPS mode.
    # If copy-mode is set to ips or tap, the traffic coming to the current
    # interface will be copied to the copy-iface interface. If 'tap' is set, the
    # copy is complete. If 'ips' is set, the packet matching a 'drop' action
    # will not be copied.
    #copy-mode: ips
    #copy-iface: eth1

  # Put default values here. These will be used for an interface that is not
  # in the list above.
  - interface: default
    #threads: auto
    #use-mmap: no
    #rollover: yes
    #tpacket-v3: yes

# Cross platform libpcap capture support
pcap:
  - interface: eth0
    # On Linux, pcap will try to use mmaped capture and will use buffer-size
    # as total of memory used by the ring. So set this to something bigger
    # than 1% of your bandwidth.
    #buffer-size: 16777216
    #bpf-filter: "tcp and port 25"
    # Choose checksum verification mode for the interface. At the moment
    # of the capture, some packets may be with an invalid checksum due to
    # offloading to the network card of the checksum computation.
    # Possible values are:
    #  - yes: checksum validation is forced
    #  - no: checksum validation is disabled
    #  - auto: suricata uses a statistical approach to detect when
    #  checksum off-loading is used. (default)
    # Warning: 'checksum-validation' must be set to yes to have any validation
    #checksum-checks: auto
    # With some accelerator cards using a modified libpcap (like myricom), you
    # may want to have the same number of capture threads as the number of capture
    # rings. In this case, set up the threads variable to N to start N threads
    # listening on the same interface.
    #threads: 16
    # set to no to disable promiscuous mode:
    #promisc: no
    # set snaplen, if not set it defaults to MTU if MTU can be known
    # via ioctl call and to full capture if not.
    #snaplen: 1518
  # Put default values here
  - interface: default
    #checksum-checks: auto

# Settings for reading pcap files
pcap-file:
  # Possible values are:
  #  - yes: checksum validation is forced
  #  - no: checksum validation is disabled
  #  - auto: suricata uses a statistical approach to detect when
  #  checksum off-loading is used. (default)
  # Warning: 'checksum-validation' must be set to yes to have checksum tested
  checksum-checks: no

# See "Advanced Capture Options" below for more options, including NETMAP
# and PF_RING.


##
## Step 5: App Layer Protocol Configuration
##

# Configure the app-layer parsers. The protocols section details each
# protocol.
#
# The option "enabled" takes 3 values - "yes", "no", "detection-only".
# "yes" enables both detection and the parser, "no" disables both, and
# "detection-only" enables protocol detection only (parser disabled).
app-layer:
  protocols:
    nfs3:
      enabled: yes
    tls:
      enabled: yes
      detection-ports:
        dp: 443

      # Completely stop processing TLS/SSL session after the handshake
      # completed. If bypass is enabled this will also trigger flow
      # bypass. If disabled (the default), TLS/SSL session is still
      # tracked for Heartbleed and other anomalies.
      #no-reassemble: yes
    dcerpc:
      enabled: yes
    ftp:
      enabled: yes
    ssh:
      enabled: yes
    smtp:
      enabled: yes
      # Configure SMTP-MIME Decoder
      mime:
        # Decode MIME messages from SMTP transactions
        # (may be resource intensive)
        # This field supercedes all others because it turns the entire
        # process on or off
        decode-mime: yes

        # Decode MIME entity bodies (ie. base64, quoted-printable, etc.)
        decode-base64: yes
        decode-quoted-printable: yes

        # Maximum bytes per header data value stored in the data structure
        # (default is 2000)
        header-value-depth: 2000

        # Extract URLs and save in state data structure
        extract-urls: yes
        # Set to yes to compute the md5 of the mail body. You will then
        # be able to journalize it.
        body-md5: no
      # Configure inspected-tracker for file_data keyword
      inspected-tracker:
        content-limit: 100000
        content-inspect-min-size: 32768
        content-inspect-window: 4096
    imap:
      enabled: detection-only
    msn:
      enabled: detection-only
    smb:
      enabled: yes
      detection-ports:
        dp: 139, 445
    # smb2 detection is disabled internally inside the engine.
    #smb2:
    #  enabled: yes
    dns:
      # memcaps. Globally and per flow/state.
      #global-memcap: 16mb
      #state-memcap: 512kb

      # How many unreplied DNS requests are considered a flood.
      # If the limit is reached, app-layer-event:dns.flooded; will match.
      #request-flood: 500

      tcp:
        enabled: yes
        detection-ports:
          dp: 53
      udp:
        enabled: yes
        detection-ports:
          dp: 53
    http:
      enabled: yes
      # memcap: 64mb

      # default-config:           Used when no server-config matches
      #   personality:            List of personalities used by default
      #   request-body-limit:     Limit reassembly of request body for inspection
      #                           by http_client_body & pcre /P option.
      #   response-body-limit:    Limit reassembly of response body for inspection
      #                           by file_data, http_server_body & pcre /Q option.
      #   double-decode-path:     Double decode path section of the URI
      #   double-decode-query:    Double decode query section of the URI
      #   response-body-decompress-layer-limit:
      #                           Limit to how many layers of compression will be
      #                           decompressed. Defaults to 2.
      #
      # server-config:            List of server configurations to use if address matches
      #   address:                List of ip addresses or networks for this block
      #   personalitiy:           List of personalities used by this block
      #   request-body-limit:     Limit reassembly of request body for inspection
      #                           by http_client_body & pcre /P option.
      #   response-body-limit:    Limit reassembly of response body for inspection
      #                           by file_data, http_server_body & pcre /Q option.
      #   double-decode-path:     Double decode path section of the URI
      #   double-decode-query:    Double decode query section of the URI
      #
      #   uri-include-all:        Include all parts of the URI. By default the
      #                           'scheme', username/password, hostname and port
      #                           are excluded. Setting this option to true adds
      #                           all of them to the normalized uri as inspected
      #                           by http_uri, urilen, pcre with /U and the other
      #                           keywords that inspect the normalized uri.
      #                           Note that this does not affect http_raw_uri.
      #                           Also, note that including all was the default in
      #                           1.4 and 2.0beta1.
      #
      #   meta-field-limit:       Hard size limit for request and response size
      #                           limits. Applies to request line and headers,
      #                           response line and headers. Does not apply to
      #                           request or response bodies. Default is 18k.
      #                           If this limit is reached an event is raised.
      #
      # Currently Available Personalities:
      #   Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,
      #   IIS_7_0, IIS_7_5, Apache_2
      libhtp:
         default-config:
           personality: IDS

           # Can be specified in kb, mb, gb.  Just a number indicates
           # it's in bytes.
           request-body-limit: 0 #100kb
           response-body-limit: 0 #100kb

           # inspection limits
           request-body-minimal-inspect-size: 32kb
           request-body-inspect-window: 4kb
           response-body-minimal-inspect-size: 40kb
           response-body-inspect-window: 16kb

           # response body decompression (0 disables)
           response-body-decompress-layer-limit: 2

           # auto will use http-body-inline mode in IPS mode, yes or no set it statically
           http-body-inline: auto

           # Take a random value for inspection sizes around the specified value.
           # This lower the risk of some evasion technics but could lead
           # detection change between runs. It is set to 'yes' by default.
           #randomize-inspection-sizes: yes
           # If randomize-inspection-sizes is active, the value of various
           # inspection size will be choosen in the [1 - range%, 1 + range%]
           # range
           # Default value of randomize-inspection-range is 10.
           #randomize-inspection-range: 10

           # decoding
           double-decode-path: no
           double-decode-query: no

         server-config:

           #- apache:
           #    address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
           #    personality: Apache_2
           #    # Can be specified in kb, mb, gb.  Just a number indicates
           #    # it's in bytes.
           #    request-body-limit: 4096
           #    response-body-limit: 4096
           #    double-decode-path: no
           #    double-decode-query: no

           #- iis7:
           #    address:
           #      - 192.168.0.0/24
           #      - 192.168.10.0/24
           #    personality: IIS_7_0
           #    # Can be specified in kb, mb, gb.  Just a number indicates
           #    # it's in bytes.
           #    request-body-limit: 4096
           #    response-body-limit: 4096
           #    double-decode-path: no
           #    double-decode-query: no

    # Note: Modbus probe parser is minimalist due to the poor significant field
    # Only Modbus message length (greater than Modbus header length)
    # And Protocol ID (equal to 0) are checked in probing parser
    # It is important to enable detection port and define Modbus port
    # to avoid false positive
    modbus:
      # How many unreplied Modbus requests are considered a flood.
      # If the limit is reached, app-layer-event:modbus.flooded; will match.
      #request-flood: 500

      enabled: no
      detection-ports:
        dp: 502
      # According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it
      # is recommended to keep the TCP connection opened with a remote device
      # and not to open and close it for each MODBUS/TCP transaction. In that
      # case, it is important to set the depth of the stream reassembling as
      # unlimited (stream.reassembly.depth: 0)

      # Stream reassembly size for modbus. By default track it completely.
      stream-depth: 0

    # DNP3
    dnp3:
      enabled: no
      detection-ports:
        dp: 20000

    # SCADA EtherNet/IP and CIP protocol support
    enip:
      enabled: no
      detection-ports:
        dp: 44818
        sp: 44818

# Limit for the maximum number of asn1 frames to decode (default 256)
asn1-max-frames: 256


##############################################################################
##
## Advanced settings below
##
##############################################################################

##
## Run Options
##

# Run suricata as user and group.
#run-as:
#  user: suri
#  group: suri

# Some logging module will use that name in event as identifier. The default
# value is the hostname
#sensor-name: suricata

# Default pid file.
# Will use this file if no --pidfile in command options.
pid-file: /usr/local/var/run/suricata.pid

# Daemon working directory
# Suricata will change directory to this one if provided
# Default: "/"
#daemon-directory: "/"

# Suricata core dump configuration. Limits the size of the core dump file to
# approximately max-dump. The actual core dump size will be a multiple of the
# page size. Core dumps that would be larger than max-dump are truncated. On
# Linux, the actual core dump size may be a few pages larger than max-dump.
# Setting max-dump to 0 disables core dumping.
# Setting max-dump to 'unlimited' will give the full core dump file.
# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
# to be 'unlimited'.

coredump:
  max-dump: 0 #unlimited

# If suricata box is a router for the sniffed networks, set it to 'router'. If
# it is a pure sniffing setup, set it to 'sniffer-only'.
# If set to auto, the variable is internally switch to 'router' in IPS mode
# and 'sniffer-only' in IDS mode.
# This feature is currently only used by the reject* keywords.
host-mode: auto

# Number of packets preallocated per thread. The default is 1024. A higher number 
# will make sure each CPU will be more easily kept busy, but may negatively 
# impact caching.
#
# If you are using the CUDA pattern matcher (mpm-algo: ac-cuda), different rules
# apply. In that case try something like 60000 or more. This is because the CUDA
# pattern matcher buffers and scans as many packets as possible in parallel.
#max-pending-packets: 1024

# Runmode the engine should use. Please check --list-runmodes to get the available
# runmodes for each packet acquisition method. Defaults to "autofp" (auto flow pinned
# load balancing).
#runmode: autofp

# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
#
# Supported schedulers are:
#
# round-robin       - Flows assigned to threads in a round robin fashion.
# active-packets    - Flows assigned to threads that have the lowest number of
#                     unprocessed packets (default).
# hash              - Flow alloted usihng the address hash. More of a random
#                     technique. Was the default in Suricata 1.2.1 and older.
#
#autofp-scheduler: active-packets

# Preallocated size for packet. Default is 1514 which is the classical
# size for pcap on ethernet. You should adjust this value to the highest
# packet size (MTU + hardware header) on your system.
#default-packet-size: 1514

# Unix command socket can be used to pass commands to suricata.
# An external tool can then connect to get information from suricata
# or trigger some modifications of the engine. Set enabled to yes
# to activate the feature. In auto mode, the feature will only be
# activated in live capture mode. You can use the filename variable to set
# the file name of the socket.
unix-command:
  enabled: yes
  filename: suricata.socket

# Magic file. The extension .mgc is added to the value here.
#magic-file: /usr/share/file/magic
#magic-file: 

legacy:
  uricontent: enabled

##
## Detection settings
##

# Set the order of alerts bassed on actions
# The default order is pass, drop, reject, alert
# action-order:
#   - pass
#   - drop
#   - reject
#   - alert

# IP Reputation
#reputation-categories-file: /usr/local/etc/suricata/iprep/categories.txt
#default-reputation-path: /usr/local/etc/suricata/iprep
#reputation-files:
# - reputation.list

# When run with the option --engine-analysis, the engine will read each of
# the parameters below, and print reports for each of the enabled sections
# and exit.  The reports are printed to a file in the default log dir
# given by the parameter "default-log-dir", with engine reporting
# subsection below printing reports in its own report file.
engine-analysis:
  # enables printing reports for fast-pattern for every rule.
  rules-fast-pattern: yes
  # enables printing reports for each rule
  rules: yes

#recursion and match limits for PCRE where supported
pcre:
  match-limit: 3500
  match-limit-recursion: 1500

##
## Advanced Traffic Tracking and Reconstruction Settings
##

# Host specific policies for defragmentation and TCP stream
# reassembly. The host OS lookup is done using a radix tree, just
# like a routing table so the most specific entry matches.
host-os-policy:
  # Make the default policy windows.
  windows: [0.0.0.0/0]
  bsd: []
  bsd-right: []
  old-linux: []
  linux: []
  old-solaris: []
  solaris: []
  hpux10: []
  hpux11: []
  irix: []
  macos: []
  vista: []
  windows2k3: []

# Defrag settings:

defrag:
  memcap: 32mb
  hash-size: 65536
  trackers: 65535 # number of defragmented flows to follow
  max-frags: 65535 # number of fragments to keep (higher than trackers)
  prealloc: yes
  timeout: 60

# Enable defrag per host settings
#  host-config:
#
#    - dmz:
#        timeout: 30
#        address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
#
#    - lan:
#        timeout: 45
#        address:
#          - 192.168.0.0/24
#          - 192.168.10.0/24
#          - 172.16.14.0/24

# Flow settings:
# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
# for flow allocation inside the engine. You can change this value to allow
# more memory usage for flows.
# The hash-size determine the size of the hash used to identify flows inside
# the engine, and by default the value is 65536.
# At the startup, the engine can preallocate a number of flows, to get a better
# performance. The number of flows preallocated is 10000 by default.
# emergency-recovery is the percentage of flows that the engine need to
# prune before unsetting the emergency state. The emergency state is activated
# when the memcap limit is reached, allowing to create new flows, but
# prunning them with the emergency timeouts (they are defined below).
# If the memcap is reached, the engine will try to prune flows
# with the default timeouts. If it doens't find a flow to prune, it will set
# the emergency bit and it will try again with more agressive timeouts.
# If that doesn't work, then it will try to kill the last time seen flows
# not in use.
# The memcap can be specified in kb, mb, gb.  Just a number indicates it's
# in bytes.

flow:
  memcap: 128mb
  hash-size: 65536
  prealloc: 10000
  emergency-recovery: 30
  #managers: 1 # default to one flow manager
  #recyclers: 1 # default to one flow recycler thread

# This option controls the use of vlan ids in the flow (and defrag)
# hashing. Normally this should be enabled, but in some (broken)
# setups where both sides of a flow are not tagged with the same vlan
# tag, we can ignore the vlan id's in the flow hashing.
vlan:
  use-for-tracking: true

# Specific timeouts for flows. Here you can specify the timeouts that the
# active flows will wait to transit from the current state to another, on each
# protocol. The value of "new" determine the seconds to wait after a hanshake or
# stream startup before the engine free the data of that flow it doesn't
# change the state to established (usually if we don't receive more packets
# of that flow). The value of "established" is the amount of
# seconds that the engine will wait to free the flow if it spend that amount
# without receiving new packets or closing the connection. "closed" is the
# amount of time to wait after a flow is closed (usually zero). "bypassed"
# timeout controls locally bypassed flows. For these flows we don't do any other
# tracking. If no packets have been seen after this timeout, the flow is discarded.
#
# There's an emergency mode that will become active under attack circumstances,
# making the engine to check flow status faster. This configuration variables
# use the prefix "emergency-" and work similar as the normal ones.
# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
# icmp.

flow-timeouts:

  default:
    new: 30
    established: 300
    closed: 0
    bypassed: 100
    emergency-new: 10
    emergency-established: 100
    emergency-closed: 0
    emergency-bypassed: 50
  tcp:
    new: 60
    established: 600
    closed: 60
    bypassed: 100
    emergency-new: 5
    emergency-established: 100
    emergency-closed: 10
    emergency-bypassed: 50
  udp:
    new: 30
    established: 300
    bypassed: 100
    emergency-new: 10
    emergency-established: 100
    emergency-bypassed: 50
  icmp:
    new: 30
    established: 300
    bypassed: 100
    emergency-new: 10
    emergency-established: 100
    emergency-bypassed: 50

# Stream engine settings. Here the TCP stream tracking and reassembly
# engine is configured.
#
# stream:
#   memcap: 32mb                # Can be specified in kb, mb, gb.  Just a
#                               # number indicates it's in bytes.
#   checksum-validation: yes    # To validate the checksum of received
#                               # packet. If csum validation is specified as
#                               # "yes", then packet with invalid csum will not
#                               # be processed by the engine stream/app layer.
#                               # Warning: locally generated trafic can be
#                               # generated without checksum due to hardware offload
#                               # of checksum. You can control the handling of checksum
#                               # on a per-interface basis via the 'checksum-checks'
#                               # option
#   prealloc-sessions: 2k       # 2k sessions prealloc'd per stream thread
#   midstream: false            # don't allow midstream session pickups
#   async-oneside: false        # don't enable async stream handling
#   inline: no                  # stream inline mode
#   drop-invalid: yes           # in inline mode, drop packets that are invalid with regards to streaming engine
#   max-synack-queued: 5        # Max different SYN/ACKs to queue
#   bypass: no                  # Bypass packets when stream.depth is reached
#
#   reassembly:
#     memcap: 64mb              # Can be specified in kb, mb, gb.  Just a number
#                               # indicates it's in bytes.
#     depth: 1mb                # Can be specified in kb, mb, gb.  Just a number
#                               # indicates it's in bytes.
#     toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
#                               # this size.  Can be specified in kb, mb,
#                               # gb.  Just a number indicates it's in bytes.
#     toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
#                               # this size.  Can be specified in kb, mb,
#                               # gb.  Just a number indicates it's in bytes.
#     randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
#                               # This lower the risk of some evasion technics but could lead
#                               # detection change between runs. It is set to 'yes' by default.
#     randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
#                               # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size
#                               # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same
#                               # calculation for toclient-chunk-size.
#                               # Default value of randomize-chunk-range is 10.
#
#     raw: yes                  # 'Raw' reassembly enabled or disabled.
#                               # raw is for content inspection by detection
#                               # engine.
#
#     segment-prealloc: 2048    # number of segments preallocated per thread
#
#     check-overlap-different-data: true|false
#                               # check if a segment contains different data
#                               # than what we've already seen for that
#                               # position in the stream.
#                               # This is enabled automatically if inline mode
#                               # is used or when stream-event:reassembly_overlap_different_data;
#                               # is used in a rule.
#
stream:
  memcap: 64mb
  checksum-validation: yes      # reject wrong csums
  inline: auto                  # auto will use inline mode in IPS mode, yes or no set it statically
  reassembly:
    memcap: 256mb
    depth: 0 #1mb                  # reassemble 1mb into a stream
    toserver-chunk-size: 2560
    toclient-chunk-size: 2560
    randomize-chunk-size: yes
    #randomize-chunk-range: 10
    #raw: yes
    #segment-prealloc: 2048
    #check-overlap-different-data: true

# Host table:
#
# Host table is used by tagging and per host thresholding subsystems.
#
host:
  hash-size: 4096
  prealloc: 1000
  memcap: 32mb

# IP Pair table:
#
# Used by xbits 'ippair' tracking.
#
#ippair:
#  hash-size: 4096
#  prealloc: 1000
#  memcap: 32mb


##
## Performance tuning and profiling
##

# The detection engine builds internal groups of signatures. The engine
# allow us to specify the profile to use for them, to manage memory on an
# efficient way keeping a good performance. For the profile keyword you
# can use the words "low", "medium", "high" or "custom". If you use custom
# make sure to define the values at "- custom-values" as your convenience.
# Usually you would prefer medium/high/low.
#
# "sgh mpm-context", indicates how the staging should allot mpm contexts for
# the signature groups.  "single" indicates the use of a single context for
# all the signature group heads.  "full" indicates a mpm-context for each
# group head.  "auto" lets the engine decide the distribution of contexts
# based on the information the engine gathers on the patterns from each
# group head.
#
# The option inspection-recursion-limit is used to limit the recursive calls
# in the content inspection code.  For certain payload-sig combinations, we
# might end up taking too much time in the content inspection code.
# If the argument specified is 0, the engine uses an internally defined
# default limit.  On not specifying a value, we use no limits on the recursion.
detect:
  profile: medium
  custom-values:
    toclient-groups: 3
    toserver-groups: 25
  sgh-mpm-context: auto
  inspection-recursion-limit: 3000
  # If set to yes, the loading of signatures will be made after the capture
  # is started. This will limit the downtime in IPS mode.
  #delayed-detect: yes

  prefilter:
    # default prefiltering setting. "mpm" only creates MPM/fast_pattern
    # engines. "auto" also sets up prefilter engines for other keywords.
    # Use --list-keywords=all to see which keywords support prefiltering.
    default: mpm

  # the grouping values above control how many groups are created per
  # direction. Port whitelisting forces that port to get it's own group.
  # Very common ports will benefit, as well as ports with many expensive
  # rules.
  grouping:
    #tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080
    #udp-whitelist: 53, 135, 5060

  profiling:
    # Log the rules that made it past the prefilter stage, per packet
    # default is off. The threshold setting determines how many rules
    # must have made it past pre-filter for that rule to trigger the
    # logging.
    #inspect-logging-threshold: 200
    grouping:
      dump-to-disk: false
      include-rules: false      # very verbose
      include-mpm-stats: false

# Select the multi pattern algorithm you want to run for scan/search the
# in the engine.
#
# The supported algorithms are:
# "ac"      - Aho-Corasick, default implementation
# "ac-bs"   - Aho-Corasick, reduced memory implementation
# "ac-cuda" - Aho-Corasick, CUDA implementation
# "ac-ks"   - Aho-Corasick, "Ken Steele" variant
# "hs"      - Hyperscan, available when built with Hyperscan support
#
# The default mpm-algo value of "auto" will use "hs" if Hyperscan is
# available, "ac" otherwise.
#
# The mpm you choose also decides the distribution of mpm contexts for
# signature groups, specified by the conf - "detect.sgh-mpm-context".
# Selecting "ac" as the mpm would require "detect.sgh-mpm-context"
# to be set to "single", because of ac's memory requirements, unless the
# ruleset is small enough to fit in one's memory, in which case one can
# use "full" with "ac".  Rest of the mpms can be run in "full" mode.
#
# There is also a CUDA pattern matcher (only available if Suricata was
# compiled with --enable-cuda: b2g_cuda. Make sure to update your
# max-pending-packets setting above as well if you use b2g_cuda.

mpm-algo: auto

# Select the matching algorithm you want to use for single-pattern searches.
#
# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only
# available if Suricata has been built with Hyperscan support).
#
# The default of "auto" will use "hs" if available, otherwise "bm".

spm-algo: auto

# Suricata is multi-threaded. Here the threading can be influenced.
threading:
  set-cpu-affinity: no
  # Tune cpu affinity of threads. Each family of threads can be bound
  # on specific CPUs.
  #
  # These 2 apply to the all runmodes:
  # management-cpu-set is used for flow timeout handling, counters
  # worker-cpu-set is used for 'worker' threads
  #
  # Additionally, for autofp these apply:
  # receive-cpu-set is used for capture threads
  # verdict-cpu-set is used for IPS verdict threads
  #
  cpu-affinity:
    - management-cpu-set:
        cpu: [ 0 ]  # include only these cpus in affinity settings
    - receive-cpu-set:
        cpu: [ 0 ]  # include only these cpus in affinity settings
    - worker-cpu-set:
        cpu: [ "all" ]
        mode: "exclusive"
        # Use explicitely 3 threads and don't compute number by using
        # detect-thread-ratio variable:
        # threads: 3
        prio:
          low: [ 0 ]
          medium: [ "1-2" ]
          high: [ 3 ]
          default: "medium"
    #- verdict-cpu-set:
    #    cpu: [ 0 ]
    #    prio:
    #      default: "high"
  #
  # By default Suricata creates one "detect" thread per available CPU/CPU core.
  # This setting allows controlling this behaviour. A ratio setting of 2 will
  # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
  # will result in 4 detect threads. If values below 1 are used, less threads
  # are created. So on a dual core CPU a setting of 0.5 results in 1 detect
  # thread being created. Regardless of the setting at a minimum 1 detect
  # thread will always be created.
  #
  detect-thread-ratio: 1.0

# Luajit has a strange memory requirement, it's 'states' need to be in the
# first 2G of the process' memory.
#
# 'luajit.states' is used to control how many states are preallocated.
# State use: per detect script: 1 per detect thread. Per output script: 1 per
# script.
luajit:
  states: 128

# Profiling settings. Only effective if Suricata has been built with the
# the --enable-profiling configure flag.
#
profiling:
  # Run profiling for every xth packet. The default is 1, which means we
  # profile every packet. If set to 1000, one packet is profiled for every
  # 1000 received.
  #sample-rate: 1000

  # rule profiling
  rules:

    # Profiling can be disabled here, but it will still have a
    # performance impact if compiled in.
    enabled: yes
    filename: rule_perf.log
    append: yes

    # Sort options: ticks, avgticks, checks, matches, maxticks
    # If commented out all the sort options will be used.
    #sort: avgticks

    # Limit the number of sids for which stats are shown at exit (per sort).
    limit: 10

    # output to json
    json: yes

  # per keyword profiling
  keywords:
    enabled: yes
    filename: keyword_perf.log
    append: yes

  # per rulegroup profiling
  rulegroups:
    enabled: yes
    filename: rule_group_perf.log
    append: yes

  # packet profiling
  packets:

    # Profiling can be disabled here, but it will still have a
    # performance impact if compiled in.
    enabled: yes
    filename: packet_stats.log
    append: yes

    # per packet csv output
    csv:

      # Output can be disabled here, but it will still have a
      # performance impact if compiled in.
      enabled: no
      filename: packet_stats.csv

  # profiling of locking. Only available when Suricata was built with
  # --enable-profiling-locks.
  locks:
    enabled: no
    filename: lock_stats.log
    append: yes

  pcap-log:
    enabled: no
    filename: pcaplog_stats.log
    append: yes

##
## Netfilter integration
##

# When running in NFQ inline mode, it is possible to use a simulated
# non-terminal NFQUEUE verdict.
# This permit to do send all needed packet to suricata via this a rule:
#        iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
# And below, you can have your standard filtering ruleset. To activate
# this mode, you need to set mode to 'repeat'
# If you want packet to be sent to another queue after an ACCEPT decision
# set mode to 'route' and set next-queue value.
# On linux >= 3.1, you can set batchcount to a value > 1 to improve performance
# by processing several packets before sending a verdict (worker runmode only).
# On linux >= 3.6, you can set the fail-open option to yes to have the kernel
# accept the packet if suricata is not able to keep pace.
# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is
# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask
# on packet of a flow that need to be bypassed. The Nefilter ruleset has to
# directly accept all packets of a flow once a packet has been marked.
nfq:
#  mode: accept
#  repeat-mark: 1
#  repeat-mask: 1
#  bypass-mark: 1
#  bypass-mask: 1
#  route-queue: 2
#  batchcount: 20
#  fail-open: yes

#nflog support
nflog:
    # netlink multicast group
    # (the same as the iptables --nflog-group param)
    # Group 0 is used by the kernel, so you can't use it
  - group: 2
    # netlink buffer size
    buffer-size: 18432
    # put default value here
  - group: default
    # set number of packet to queue inside kernel
    qthreshold: 1
    # set the delay before flushing packet in the queue inside kernel
    qtimeout: 100
    # netlink max buffer size
    max-size: 20000

##
## Advanced Capture Options
##

# general settings affecting packet capture
capture:
  # disable NIC offloading. It's restored when Suricata exists.
  # Enabled by default
  #disable-offloading: false
  #
  # disable checksum validation. Same as setting '-k none' on the
  # commandline
  #checksum-validation: none

# Netmap support
#
# Netmap operates with NIC directly in driver, so you need FreeBSD wich have
# built-in netmap support or compile and install netmap module and appropriate
# NIC driver on your Linux system.
# To reach maximum throughput disable all receive-, segmentation-,
# checksum- offloadings on NIC.
# Disabling Tx checksum offloading is *required* for connecting OS endpoint
# with NIC endpoint.
# You can find more information at https://github.com/luigirizzo/netmap
#
netmap:
   # To specify OS endpoint add plus sign at the end (e.g. "eth0+")
 - interface: eth2
   # Number of receive threads. "auto" uses number of RSS queues on interface.
   #threads: auto
   # You can use the following variables to activate netmap tap or IPS mode.
   # If copy-mode is set to ips or tap, the traffic coming to the current
   # interface will be copied to the copy-iface interface. If 'tap' is set, the
   # copy is complete. If 'ips' is set, the packet matching a 'drop' action
   # will not be copied.
   # To specify the OS as the copy-iface (so the OS can route packets, or forward
   # to a service running on the same machine) add a plus sign at the end
   # (e.g. "copy-iface: eth0+"). Don't forget to set up a symmetrical eth0+ -> eth0
   # for return packets. Hardware checksumming must be *off* on the interface if
   # using an OS endpoint (e.g. 'ifconfig eth0 -rxcsum -txcsum -rxcsum6 -txcsum6' for FreeBSD
   # or 'ethtool -K eth0 tx off rx off' for Linux).
   #copy-mode: tap
   #copy-iface: eth3
   # Set to yes to disable promiscuous mode
   # disable-promisc: no
   # Choose checksum verification mode for the interface. At the moment
   # of the capture, some packets may be with an invalid checksum due to
   # offloading to the network card of the checksum computation.
   # Possible values are:
   #  - yes: checksum validation is forced
   #  - no: checksum validation is disabled
   #  - auto: suricata uses a statistical approach to detect when
   #  checksum off-loading is used.
   # Warning: 'checksum-validation' must be set to yes to have any validation
   #checksum-checks: auto
   # BPF filter to apply to this interface. The pcap filter syntax apply here.
   #bpf-filter: port 80 or udp
 #- interface: eth3
   #threads: auto
   #copy-mode: tap
   #copy-iface: eth2
   # Put default values here
 - interface: default

# PF_RING configuration. for use with native PF_RING support
# for more info see http://www.ntop.org/products/pf_ring/
pfring:
  - interface: eth0
    # Number of receive threads (>1 will enable experimental flow pinned
    # runmode)
    threads: 1

    # Default clusterid.  PF_RING will load balance packets based on flow.
    # All threads/processes that will participate need to have the same
    # clusterid.
    cluster-id: 99

    # Default PF_RING cluster type. PF_RING can load balance per flow.
    # Possible values are cluster_flow or cluster_round_robin.
    cluster-type: cluster_flow
    # bpf filter for this interface
    #bpf-filter: tcp
    # Choose checksum verification mode for the interface. At the moment
    # of the capture, some packets may be with an invalid checksum due to
    # offloading to the network card of the checksum computation.
    # Possible values are:
    #  - rxonly: only compute checksum for packets received by network card.
    #  - yes: checksum validation is forced
    #  - no: checksum validation is disabled
    #  - auto: suricata uses a statistical approach to detect when
    #  checksum off-loading is used. (default)
    # Warning: 'checksum-validation' must be set to yes to have any validation
    #checksum-checks: auto
  # Second interface
  #- interface: eth1
  #  threads: 3
  #  cluster-id: 93
  #  cluster-type: cluster_flow
  # Put default values here
  - interface: default
    #threads: 2

# For FreeBSD ipfw(8) divert(4) support.
# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
# Additionally, you need to have an ipfw rule for the engine to see
# the packets from ipfw.  For Example:
#
#   ipfw add 100 divert 8000 ip from any to any
#
# The 8000 above should be the same number you passed on the command
# line, i.e. -d 8000
#
ipfw:

  # Reinject packets at the specified ipfw rule number.  This config
  # option is the ipfw rule number AT WHICH rule processing continues
  # in the ipfw processing system after the engine has finished
  # inspecting the packet for acceptance.  If no rule number is specified,
  # accepted packets are reinjected at the divert rule which they entered
  # and IPFW rule processing continues.  No check is done to verify
  # this will rule makes sense so care must be taken to avoid loops in ipfw.
  #
  ## The following example tells the engine to reinject packets
  # back into the ipfw firewall AT rule number 5500:
  #
  # ipfw-reinjection-rule-number: 5500


napatech:
    # The Host Buffer Allowance for all streams
    # (-1 = OFF, 1 - 100 = percentage of the host buffer that can be held back)
    hba: -1

    # use_all_streams set to "yes" will query the Napatech service for all configured
    # streams and listen on all of them. When set to "no" the streams config array
    # will be used.
    use-all-streams: yes

    # The streams to listen on
    streams: [1, 2, 3]

# Tilera mpipe configuration. for use on Tilera TILE-Gx.
mpipe:

  # Load balancing modes: "static", "dynamic", "sticky", or "round-robin".
  load-balance: dynamic

  # Number of Packets in each ingress packet queue. Must be 128, 512, 2028 or 65536
  iqueue-packets: 2048

  # List of interfaces we will listen on.
  inputs:
  - interface: xgbe2
  - interface: xgbe3
  - interface: xgbe4


  # Relative weight of memory for packets of each mPipe buffer size.
  stack:
    size128: 0
    size256: 9
    size512: 0
    size1024: 0
    size1664: 7
    size4096: 0
    size10386: 0
    size16384: 0

##
## Hardware accelaration
##

# Cuda configuration.
cuda:
  # The "mpm" profile.  On not specifying any of these parameters, the engine's
  # internal default values are used, which are same as the ones specified in
  # in the default conf file.
  mpm:
    # The minimum length required to buffer data to the gpu.
    # Anything below this is MPM'ed on the CPU.
    # Can be specified in kb, mb, gb.  Just a number indicates it's in bytes.
    # A value of 0 indicates there's no limit.
    data-buffer-size-min-limit: 0
    # The maximum length for data that we would buffer to the gpu.
    # Anything over this is MPM'ed on the CPU.
    # Can be specified in kb, mb, gb.  Just a number indicates it's in bytes.
    data-buffer-size-max-limit: 1500
    # The ring buffer size used by the CudaBuffer API to buffer data.
    cudabuffer-buffer-size: 500mb
    # The max chunk size that can be sent to the gpu in a single go.
    gpu-transfer-size: 50mb
    # The timeout limit for batching of packets in microseconds.
    batching-timeout: 2000
    # The device to use for the mpm.  Currently we don't support load balancing
    # on multiple gpus.  In case you have multiple devices on your system, you
    # can specify the device to use, using this conf.  By default we hold 0, to
    # specify the first device cuda sees.  To find out device-id associated with
    # the card(s) on the system run "suricata --list-cuda-cards".
    device-id: 0
    # No of Cuda streams used for asynchronous processing. All values > 0 are valid.
    # For this option you need a device with Compute Capability > 1.0.
    cuda-streams: 2

##
## Include other configs
##

# Includes.  Files included here will be handled as if they were
# inlined in this configuration file.
#include: include1.yaml
#include: include2.yaml
