Suricata

Heelo. I tested byte_extract and found that it does not work in some situations. snort(2.9.12) detected all of the following situations:

Payload = |31 30 32 36 10 38 20 21 33 34 2e 11 22 33 44 55 66 2e 32 31|
The pcap file is also attached.

alert tcp any any -> any any (msg:"byte extract test 1"; byte_extract:2,0,two1,string,dec; content:"|33 34|"; offset:0; depth:two1; sid:1; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 2"; byte_extract:1,2,two2,string,dec; content:"|33 34|"; offset:8; depth:two2; sid:2; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 3"; byte_extract:1,2,two3,string,dec; byte_extract:1,5,eight,string,dec; content:"|33 34|"; offset:eight; depth:two3; sid:3; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 4"; byte_extract:1,3,sixd1,string,dec; content:"|31 30|"; content:"|33 34|"; distance:sixd1; sid:4; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 5"; byte_extract:1,2,twow,string,dec; byte_extract:1,3,sixd2,string,dec; content:"|31 30|"; content:"|33 34|"; distance:sixd2; within:twow; sid: 5; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 6"; content:"|31 30|"; byte_extract:1,6,three1,relative,string,dec; content:"|36 10|"; offset:three1; depth:2; sid:6; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 7"; byte_extract:1,2,dectwo1,string,dec; content:"|32|"; offset:dectwo1; depth:1; sid:7; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 8"; byte_extract:1,2,dectwo2,string,dec; content:"|32|"; offset:dectwo2; sid:8; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 9"; byte_extract:1,4,hexten; byte_extract:1,0,decone,string,dec; content:"|66|"; offset:hexten; depth:decone; sid:9; rev:1;)
alert tcp any any -> any any (msg:"byte extract test 10"; byte_extract:1,4,two4; content:"|31|"; depth:1; content:"|2e|"; distance:two4; within:1; sid:10; rev:1;)

suricata alert: sid:1, sid:4, sid:5, sid:8
snort alert: all rules

If offset and depth are used together except "offset: 0", they are not alerted.
In case of sid: 10, it will be alerted when removing within or depth.

Is it correct not to work in suricata? Or is it a bug?

Please check the above. Thank you.